manualshive.com logo in svg

GE Digital Energy L60, Инструкция по эксплуатации

Поделиться
Скачать
GE Digital Energy L60 Скачать руководство пользователя страница 560

10-4

L60 LINE PHASE COMPARISON SYSTEM – INSTRUCTION MANUAL

UPGRADE FIRMWARE

CHAPTER 10: MAINTENANCE

10

4.

If the device has the CyberSentry option, use the User Name of "Administrator" or "Engineer", and the password 
programmed for the selected role. The default password is "ChangeMe1#" (without quotation marks).

5.

If the device does not have the CyberSentry option, use the User Name of "Setting", and the password programmed for 
the Setting role. The default password is "ChangeMe1#" (without quotation marks).

6.

Upload the backup file copy with the CID extension. WinSCP uses drag-and-drop or copy-and-paste for this.

7.

Manually copy the remaining settings, outlined as follows.

To manually copy remaining settings:
1.

Settings listed in section 4.1.2 Settings Files are not transferred to the UR device with settings files. Enter them 
manually either via the front panel or via EnerVista UR Setup software. The values that these settings had at the time 
the backup was created are contained within the backup file, accessed through EnerVista UR Setup software.

10.3  Upgrade firmware

The firmware of the L60 device can be upgraded, locally or remotely, using the EnerVista software. Instructions are 
outlined here and in the Help file under the topic “Upgrading Firmware.”
Upgrades are possible for the same release (such as 7.01 to 7.02) and from one firmware version to another (such as 7.2 to 
7.3). When upgrading to another firmware version, check the release notes for compatibility. Release notes are located in 
the Support Documents section of the website at 

http://gedigitalenergy.com/app/ViewFiles.aspx?prod=urfamily&type=9

 

If you are upgrading from version 7.0 or 7.1 to 7.2 or later, some CPU modules require a new boot version. Update this first.
To upgrade the firmware:
1.

If required, download the boot file and/or firmware from 

http://www.gedigitalenergy.com/app/ViewFiles.aspx?prod=urfamily&type=7

 

The firmware and boot files are .bin files.

2.

Navigate to 

Settings > Product Setup > Security 

and ensure that the 

Remote Setting Authorized

 and 

Local Setting 

Authorized

 settings are "ON." On the front panel of the device, the path is 

Settings 

 Product Setup 

 Security 



 Dual 

Permission Security Access

.

If using CyberSentry security, also ensure that the relay and firmware are not locked under the 

Settings > Product 

Setup > Security > Supervisory

 settings.

3.

In EnerVista, back up the device settings by right-clicking the device and selecting 

Read Device Settings

. In the 

window that displays, select an existing file to overwrite, or enter a name for a new settings file and optionally a 
location for the new file. Click the 

Receive

 button to start the backup.

If an "Incompatible device order codes or versions" message displays, it means that you are trying to overwrite a file 
for another product. You access the 

Convert Settings File

 option by right-clicking the file in the 

Offline Window

 area 

at the lower left.

4.

In EnerVista, navigate to 

Maintenance > Update Firmware

.

First select the boot file if applicable, locating the .bin file, and proceed. Restart the device, the EnerVista software, and 
refresh the order code in EnerVista under the 

Device Setup

 button.

To update the firmware, click 

Maintenance > Update Firmware

, select the firmware update by locating the .bin file, 

and proceed with the update.
If an "Unable to put relay in flash mode" message displays, set the 

Settings > Product Setup > Security > Dual 

Permission Security Access > Remote Setting Authorized

 and 

Local Setting Authorized

 settings to "ON" and try 

again.
When the update is finished, restart the device by clicking 

Maintenance > Reboot Relay Command

, restart the 

EnerVista software, and refresh the order code in EnerVista under the 

Device Setup

 button. As the device is starting 

up, verify the boot and firmware version, or in EnerVista check them under 

Actual Values > Product Info > Firmware 

Revisions

. The boot version is not the same as the firmware revision, and the firmware revision reflects the UR release, 

for example firmware revision 7.3 is UR release 7.3.

Содержание L60





























































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды