GCC Technologies RX II Series, Руководство пользователя

Страница: 18 / 229

RX II Series User Manual
Installation 2-5
Step 6
Insert the roll holder support with the screws into the holes of the stand, and then tighten
them up as shown in
Figure 2-7
. You could decide roll holder support’s position by
inserting into different holes.
Step 7
Place two roll holders onto the roll holder support and ensure the white protrusion is
wedged in the groove. (
Figure 2-8
)
Roll holder support
Roll holders
Figure 2-8
3 screws
Roll holder support
Figure 2-7