GCC Technologies RX II Series, Руководство пользователя

Страница: 128 / 229

RX II Series User Manual
CorelDRAW Plug-In A-4
Add Registration Mark by Object
If you tick “Add Registration Mark by Object”, you will be offered three options of registration
marks as shown below.
4-Point Positioning
l
Length: The length of marks
à
Range: 5mm~50mm
à
Optimized Setting: 25mm
l
Thickness: The line thickness of marks
à
Range: 1mm~2mm
à
Optimized Setting: 1mm
l
Margin: The distance between marks and images
à
Range: 0mm~50mm
à
Optimized Setting: 5mm
Segmental Positioning
l
X Step: The distance of intermediate position on the X axis
l
Y Step: The distance of intermediate position on the Y axis
à
Range: 200mm~600mm
à
Optimized Setting: Less than 500mm
Multiple Copies
l
No. of X Copies: The numbers of copies on X axis
l
No. of Y Copies: The numbers of copies on Y axis
à
Range: 1~50. (The more copies you make, the more time
is needed for data transmission.)
à
Numbers of X Copies * Numbers of Y Copies = The total
amount of image copies
l
Copies with outline
：
To show outlines of image graphics
Figure A3-4
Note: The values entered in the “4-Point Positioning” section (length, thickness and
margin) will still be applied when you tick “Segmental Positioning” or “Multiple Copies”.