GCC Technologies RX II Series, Руководство пользователя

Страница: 102 / 229

RX II series User Manual
Automatic-Aligning System
5-3
5.2.2 AAS II on RX II series
There are three types of AAS II mark patterns: 4-Point Positioning, Segmental
Positioning, and Multiple Copies. Note that before print out your designs by inkjet printers,
the registration marks have to be created on your graphic designs by cutting software
like GreatCut, SignPal or GCC CorelDraw plug-in. Hand-made marks or drawings won
’t
be reorganized by GCC cutting plotters. For more details about registration mark setting
in cutting software, please refer to
“
Appendix A-3 : CorelDraw Plug-In Instruction,
Appendix A-4 : Illustrator Plug-In Instruction, Appendix A-5 : GreatCut Instruction, and
Appendix A-6 : SignPal 10.5 Instruction.
”
1.
4-Point Positioning
This is the basic mark pattern that AAS II will auto detect four registration marks and contour
cut images inside those marks.
 Command: Esc.D1;(XDist);(YDist):
 Layout: 4 registration marks at the 4 corners around the design
2.
Segmental Positioning
In addition to 4 original points, the intermediate registration marks are added on both X axis
and Y axis to help contour cut accurately, especially for cutting large images.

Command: Esc.D2;(XDist);(YDist);(XStep);(YStep):

Layout:
In-between distance on X: 200~600mm, default 300mm
In-between distance on Y: 200-600mm, default 300mm

High Precision Long Picture Cutting