Master Programming Level
Programming
GF505 & GF510 Series PN 53164:A 3/26/2007
83
3.5.5.3.2 Secondary Phone
Press
2
while viewing Onboard DACT Screen to program the type of secondary phone line
being connected to the DACT. The following screen will be displayed:
Press
1
to select Touchtone dialing,
2
to select Rotary dialing with a make/break ratio of 67/33
or
3
to select Rotary dialing with a make/break ratio of 60/40.
3.5.5.3.3 Central Station
Central Station programming configures the control panel DACT for contacting the central
station. Pressing
3
while viewing Onboard DACT Screen will cause the following screens to be
displayed:
3.5.5.3.3.1 Reporting
To enable the DACT for reporting FACP activity to the central station, press
1
while viewing
Central Station Screen #1 so the display reads
Reporting Yes
. Each press of the
1
key will
toggle the display between
Reporting Yes
and
Reporting No
.
3.5.5.3.3.2 Report Style
The DACT can be programmed to transmit reports to primary and/or secondary central station
phone numbers as a backup. Press
2
while viewing Central Station Screen #1 to display the
following screen:
Press
1
to have all reports transmitted to the central station secondary phone number as a
backup only if the primary phone line fails,
2
to transmit all reports to both the primary and
secondary phone numbers all of the time or
3
to send reports to the first available phone
number.
ON BOARD DACT
1=PRIM PHONE
2=SCND PHONE
3=CENTRAL STATION
Onboard DACT
PHONE LINE
1=TOUCHTONE
2=ROTARY 67/33 (EURO)
3=ROTARY 60/40 (U.S.)
Secondary Phone Type Screen
CENTRAL STATION
1=REPORTING NO
2=REPORT STYLE
BACKUP ONLY
Central Station Screen #1
CENTRAL STATION
1=PRIMARY
2=SECONDARY
Central Station Screen #2
REPORT STYLE
1=BACKUP ONLY
2=BOTH
3=FIRST AVAILABLE
Backup Reporting Screen
