Programming
Master Programming Level
78
GF505 & GF510 Series PN 53164:A 3/26/2007
3.5.5.1.4 ANN-S/PG Options Screen
The Printer Option allows the user to configure the optional printer. Pressing
1
while viewing
the ANN-BUS Screen #2 will display the following screens:
Pressing
1
for Port while viewing Printer Options screen #1 will allow the programmer to select
between a Parallel and Serial Port for printer connection. Each press of the
1
key will cause the
display to toggle between
Port PAR
(parallel) and
Port SER
(serial). It is important to note that
the interface selected determines which options are available to the user.
If the Parallel Port option is selected, the user has the option to supervise the printer and select
an offline timer for the supervision by pressing
2
for Printer Supervision while viewing Print
Options screen #1. Each press of the
2
key will cause the display to toggle between
Printer
Supv NO
for no supervision and
Printer Supv YES
for printer supervision. Note that this option
is not selectable if the Serial Port option has been selected.
If the Parallel Port option is selected, the user has the ability to select an
Offline Timer
by
pressing
3
while viewing Print Options screen #1. The resultant screen allows the programmer
to program the
Offline Timer
for a delay of between 0 and 255 seconds before loss of printer
supervision is reported as a trouble.
If the Serial Port option is selected, the
Printer Supv
and
Offline Timer
options will not be
available. The Baud Rate, Data Bits, Parity and Stop Bits options are only available when the
Serial Port option has been selected.
Pressing
1
for
Baud Rate
while viewing Printer Options screen #2 will cause a screen to appear
which allow the user to select a Baud Rate of
19200, 9600 or 2400
.
Pressing
2
for
Data Bits
while viewing Printer Options screen #2 will cause screens to appear
which allow the user to select
5, 6, 7
or
8 Data Bits
.
Pressing
3
for
Parity
while viewing Printer Options screen #2 will cause a screen to appear
which allows the user to select between
No Parity
,
Even Parity
or
Odd Parity
.
Pressing
1
for Stop Bits while viewing Printer Options screen #3 will cause a screen to appear
which allows the user to select between
0.5
,
1.0
or
2.0 Stop Bits
.
PROGRAMMING
1=ANN-S/PG OPTIONS
2=ANN-I/O OPTIONS
3=ANN-80 OPTIONS
ANN-BUS Screen #2
ANN-S/PG OPTIONS
1=PORT PARALLEL
2=PRINTER SUPV NO
3=OFFLINE TIMER 60
Printer Options Screen #1
ANN-S/PG OPTIONS
1=BAUD RATE N/A
2=DATA BITS N/A
3=PARITY N/A
Printer Options Screen #2
ANN-S/PG OPTIONS
1=STOP BITS N/A
Printer Options Screen #3
