Programming
Master Programming Level
62
GF505 & GF510 Series PN 53164:A 3/26/2007
Description
The Description selection allows the programmer to enter additional information about the
detector currently being programmed. This information will be displayed as part of the device
label on the display. Pressing
2
while viewing Edit Input Zone Screen #4 will cause the
following screen to be displayed:
A flashing cursor will appear at the first asterisk to the left. The programmer can enter
additional descriptive information about the device being programmed. This information will
appear on the display along with the standard device label information.
A maximum of 20 characters (including spaces) can be entered. To enter alphanumeric
characters from the keypad, repeatedly press the appropriate key until the desired character is
displayed in the first position. For example, to enter the letter
B
, press the
2
(ABC) key three
times to toggle through the characters
1
,
A
and
B
. Press the right arrow key to move the cursor
one position to the right and repeat the process to enter the next character. To enter a space,
press the
* (QZ)
key four times until a blank appears in the desired position. When all
characters have been entered, press the Enter key to store the information. The display will
return to the Edit Detector Screen #5, displaying the new information at the bottom of the
screen.
Recall/Increment Function
In addition, the user may use the Recall/Increment function at any time when the cursor is on
the first letter of the Description, Adjective or Noun field as follows:
•
If the zero key is pressed, a
0
is placed in the first letter position
•
If the zero key is then pressed a second time with no intervening key actions, the entire field
is replaced with the field entered
for the previous device programmed
, and the cursor moves
to the last character of the field (Recall function). The Recalled Adjective or Noun field may
now be changed letter-by-letter
•
If the zero key is pressed again with no other intervening key actions and the last character in
the field is a number
0-9
, the number is incremented by one. If the last character is a letter, it
changes to a
0
. If the last character goes from
9
to
0
and the characters to the left of the last
character are also numbers, they are also incremented (overflow)
•
The above increment function may be repeated with each press of the zero key
INPUT ZONE #
1=NOUN/ADJECTIVE
2=DESCRIPTION
Edit Input Zone Screen #4
ZONE # DESCRIPTION
PRESS ENTER IF DONE
********************
Adjective/Noun Screen
