Fujitsu ETERNUS CS800 S6 Скачать руководство пользователя страница 215

Страница: 215 / 561

10.3 VTL Configuration

State

The state of the cartridge:

State:

Scratch

- Scratch newly created virtual media or

virtual media that has been recycled with no
data on it.

Virtual

- Virtual media with data on it.

Virtual, Mounted

- Virtual media with data that

is mounted in a tape drive.

Vaulted

- Virtual media with data that has been

exported from a partition. Data is still intact on
the virtual media.

Exported

- Virtual media with no data that has

been exported from a partition. Media has to be
in this state before it can be deleted from the
ETERNUS CS800.

Pool

- The type of cartridge pool such as

application, cleaning, service, or unknown.

Used (%)

The percentage of the tape cartridge that is used.

CAUTION!

The

Used (%)

value is not updated while the me

dia is mounted.

Because of this, the displayed

Used (%)

value

may be different from the real value for mounte
d media.

Capacity

The total capacity of the tape cartridge.

Click a column heading to sort the rows in the table by that column. Click
the column heading again to reverse the sort order.

Click the Information button

[i]

next to a cartridge to display detailed

information about the cartridge.

2. In the

Action

drop-down box, select the action to perform:

Delete

Deletes a cartridge from the *UNASSIGNED partition.
The cartridge must be in the exported state.

ETERNUS CS800

215

Содержание ETERNUS CS800 S6


















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ETERNUS CS800 S6

Отзывы:

Fujitsu ETERNUS CS800 S6, Руководство пользователя, Страница: 215 / 561

Результаты поиска

Содержание ETERNUS CS800 S6

Отзывы: