Fujitsu ETERNUS CS800 S6 Скачать руководство пользователя страница 166

Страница: 166 / 561

8.7 Email Alerts Wizard

Step 1: About

1. Read the information about the wizard.

2. Click

Next

to continue.

At any time while using the wizard, you can click

Previous

to return to the previous

step.

Figure 126: Email Alerts Wizard: About

Step 2: Server

1. In the

Hostname or IP Address

box, enter the hostname or IP address of the outgoing

e-mail server (see

"Email Alerts Wizard: Server" on page 167

When entering IP addresses, never use an address that is in a reserved IP address
range.

To see a list of reserved IP address ranges, click the quick tip icon

[?]

located near

the IP address field.

To use hostname format, you must specify at least one DNS IP address on
the

Network

page (see

"Network" on page 293

2. In the

From Email Address

box, enter the return e-mail address displayed in e-mails

sent by the ETERNUS CS800.

3. Specify a return address that lets you easily identify the system that generated the e-

mail (for example,

[email protected]

). The return address must

contain an @ symbol and a valid domain name, including a period.

4. (Optional) Select the

Enable Admin Alerts about Email Server not configured

check

box to have system generate administration alerts to notify you if an e-mail server is
not configured.

5. (Recommended) Select the

Enable automatic emails to Fujitsu Technology

Solutions

check box to periodically send system configuration and status information

ETERNUS CS800

166

Содержание ETERNUS CS800 S6


















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ETERNUS CS800 S6

Отзывы:

Fujitsu ETERNUS CS800 S6, Руководство пользователя, Страница: 166 / 561

Результаты поиска

Содержание ETERNUS CS800 S6

Отзывы: