Fujitsu ETERNUS CS800 S6, Руководство пользователя

Страница: 113 / 561

6.3 Running the Getting Started Wizard
IP Address The IP address of the interface.
Netmask The network mask of the interface.
Gateway The gateway of the ETERNUS CS800. (This is usually not the same as
the default gateway.)
5. If necessary, specify NAT (Network Address Translation) settings for the interface:
If the ETERNUS CS800 is a replication target and is behind a NAT router, you
must configure a NAT IP Address.
NATed Select the check box if the IP address of the ETERNUS CS800 is
translated by a firewall to a NAT IP address when the ETERNUS
CS800 communicates to the outside world.
NAT IP Address The IP address used to access the ETERNUS CS800 from the
public network. The router that connects the ETERNUS CS800 to
the Internet performs Network Address Translation that maps
the IP address of the ETERNUS CS800 to the NAT IP address,
providing a valid replication interface for a source ETERNUS
CS800.
6. Select the check box for each type of network traffic allowed on the interface
(segmentation):
At least one interface must allow management traffic.
Mgmt Select to allow management traffic.
Repl Select to allow replication traffic.
Data Select to allow data traffic.
Any Select to allow all types of traffic (management, replication, and data).
Additional Information
l
If the ETERNUS CS800 is configured for source or target replication, you should
configure at least one interface to allow replication traffic (select
Repl or Any )
before applying changes to network settings.
l
If you configure segmentation for non-bonded interfaces (Ethernet ports) that are
on the same subnet, all traffic will use the lowest numbered Ethernet port first, no
matter how segmentation is configured. To avoid this issue, create bonded
interfaces, and then select the desired traffic type for each bonded interface.
7. Click Update to save the changes you made to the IP Address table. (Clicking Update
does not yet apply the new network settings to the ETERNUS CS800.)
8. Click Delete to remove IP address information for the selected interface. Or click Undo
to revert all current IP Address Table changes to the last update.
ETERNUS CS800 113