FujiFilm EP-6000, Руководство по обслуживанию

Страница: 57 / 445

SS1807-N002 Instruction of System
－
22/106
2.2.1 Display Warning
2.2.1.1 Iris Timer
When the iris timer function is turned on, if the maximum amount of light, which is specified for
each Endoscope, is kept for more than one minute, the system decreases the amount of light by
closing the mechanical iris at a maximum and waits for a signal from the Freeze switch of the
Endoscope.
While the iris timer functions, the message “Iris timer is activated and the amount of light is
being decreased.
To resume examination, press the FR (Freeze) switch on the scope” is displayed at the center
of the screen.
When the Freeze switch of the Endoscope is pressed, the message disappears and operation
returns to the normal observation screen.
Menu item Setting Default Description Remarks
Iris Timer
ON ○
If the maximum amount of light specified for
the Endoscope is kept for more than one
minute, the system decreases the amount of
light by closing the mechanical iris at a
maximum and waits for a signal from the
Freeze switch of the Endoscope.
OFF The iris timer function is turned off.
2.2.1.2 Warning Display at End of Exam
This item determines whether or not the warning message is displayed if the operator does not
press and hold the EXAM. button for about two seconds at the end of examination.
[Note] Irrespective of the setting of this item, examination cannot be ended.
Menu item Setting Default Description Remarks
Warning
Display at
End of Exam
ON ○
If the operator does not press and hold the EXAM.
button for about two seconds at the end of
examination, a warning beep sounds and the
warning message appears.
OFF
If the operator does not press and hold the EXAM.
button for about two seconds at the end of
examination, only a warning beep sounds.
2.2.1.3 when Pat. ID is not entered
This item specifies whether or not the warning message is displayed if an examination is
conducted with no patient ID.
* When [Freeze Mode] in [Freeze Mode Setting] is set to "FRZ" and [Scope SW Setting] is set to
"Record", respectively, even if ON is selected with no patient ID registered, the warning
message does not appear.
Menu item Setting Default Description Remarks
when Pat. ID
is not
entered
ON
If an examination is conducted with no
patient ID, the warning message appears
upon capturing of the first image. (Press the
Enter button to clear the message and
continue the examination.)
OFF ○
Even if an examination is conducted with no
patient ID, no waring message appears upon
capturing of the first image.