FujiFilm EP-6000, Руководство по обслуживанию

Страница: 155 / 445

SS1807-N002 Failure Analysi
－
14/64
Display
error
code
Classification
level Display message
(occurrence, response)
Display message
(guidance to
error)
Estimated cause Trigger of message display Service response
130 Information
In the process of
acquiring scope operating
mode.
Please wait for a while.
The operating mode selection
screen in the factory menu was
opened. Same as on the left.
The message was displayed
when trying to open the screen.
In case when acquisition of the
operation mode frequently fails
even after waiting for a while,
check the version of the Rear
CPU and Front CPU. If the
version is later than 580 60P
support, replace the patient PCB.
131 Information
In the process of setting
scope operating mode.
Please wait for a while. The setup button was pressed on
the operating mode selection
screen in the factory menu.
Same as on the left.
The message was displayed
when trying to set the operating
mode.
In case when acquisition of the
operation mode frequently fails
even after waiting for a while,
check the version of the Rear
CPU and Front CPU. If the
version is later than 580 60P
support, replace the patient PCB.
132 Information
Please enter password for
forwarding correction
function.
133 Information
Please enter current
password.
(Press [ESC] key to
cancel. )
134 Information
Please enter a new
password (four or more
characters).
(Press [ESC] key to
cancel. )
135 Information
Please enter a new
password once again for
confirmation.
(Press [ESC] key to
cancel. )
136 Information
Please enter a password.
(Press [ESC] key to
cancel. )
137 Information
Please enter a password.
(Press [ESC] key to
cancel. )
138 Information
Different password.
Please enter the correct
password.
139 Information
Different password.
Please enter the correct
password.