5.2 Description of Menu Items
93
RAM Disk
Allocates memory to the RAM Disk file system for Secure Print and Sample
Print.
• [50MB] to [1000 MB]
Allocates memory for using Secure Print and Sample Print. Specifies the
value in 50 MB increments. The maximum value differs depending on the
capacity of your additional memory.
The default setting varies according to the size of memory installed.
[300 MB] (with 512 MB memory) / [500 MB] (with 1024 MB memory).
• [Off]
Does not allocate memory for using Secure Print and Sample Print.
Note
• [RAM Disk] appears only when the additional memory (optional) is installed.
Substitute Tray
Sets whether to print on paper loaded in another tray when there is no paper
left in the tray selected by the auto tray selection feature.
• [Off] (default)
Select this not to replace paper but display a message prompting you to
load paper.
• [Larger Size]
Select this to replace the paper with a larger size paper before printing in
100% magnification ratio.
• [Closest Size]
Select this to replace the paper with the nearest size paper before printing
in 100% magnification ratio.
Note
• These settings will be overridden by requests sent from computers.
mm / inch
Set the unit for the custom paper size to millimeters (mm) or inches (").
• [Millimeters(mm)] (default)
Indicates length in millimeters (mm).
• [Inches (")]
Indicates length in inches (").
Interrupt Print
Sets whether to interrupt the current print job if the printer receives data from
the scanner while it is printing.
• [On] (default)
Interrupts the current print job.
Temporarily stops receiving the data for the print job. The data that is
already received continues being printed, as soon as the printers buffer
memory has enough space to receive the print data from the scanner, the
current print job is interrupted and the data from the scanner is printed. This
means that the data from the scanner is printed in the middle of the current
print job.
• [Off]
Does not interrupt the current print job.
The print data from the scanner is printed after the current print job and any
print jobs incoming from other ports are finished printing.
Print Priority
Limits the number of pages that can be stored in the printer's buffer memory.
This means that the data from the scanner is printed quickly when [Interrupt
Print] is set to [On].
• [Off] (default)
Number of pages is not limited.
When a print job from the scanner interrupts the current print job, print data
already in the printer's buffer memory continues to print until there is
enough space for the print data from the scanner. In this case, it may take a
long time to print the print data from the scanner if each page of the print
data already in the buffer memory is small because many pages need to be
printed to open up enough space in the buffer memory.
• [On]
Number of pages is limited.
The print data from the scanner is printed quickly because the number of
pages stored in the printer's buffer memory is limited. However, this may
reduce the performance of regular printing.
Item
Description