Fuji Xerox DocuPrint C2120 Скачать руководство пользователя

Страница: 39 / 206

2.2 Turning On and Off the Printer

2.2

Turning On and Off the Printer

Turning On the Printer

Press the power switch of the printer to the
<I> position.

When the power is on, [Please wait...] is
displayed on the control panel. Check that
this display changes to [Ready to Print].

Important

• The [Please wait...] message indicates the printer is

warming up and not ready to print.

• If an error message appears, refer to"6.6 Error

Messages (In Alphabetical Order)" (P. 118) for a
solution.

Turning Off the Printer

Important

• Do not turn off the printer while printing is in progress. Doing so may cause a paper jam.
• Do not turn off the printer when any print jobs remain in the printer. Doing so will deletes the print jobs or

other data stored in memory.

On the control panel display, confirm that
no job is in progress.

Press the power switch of the printer to the
<

{

> position to turn off the printer.

Ready to Print

Содержание DocuPrint C2120














































































































































































































Результаты поиска

Содержание DocuPrint C2120

Отзывы:

Похожие инструкции для DocuPrint C2120

Бренды по названию

Популярные бренды

Fuji Xerox DocuPrint C2120, Руководство пользователя

Результаты поиска

Содержание DocuPrint C2120

Отзывы:

Похожие инструкции для DocuPrint C2120

Бренды по названию

Популярные бренды