Fuji Xerox Document Centre C250, Руководство пользователя

Страница: 466 / 556

16 Problem Solving
464
Probl
em
So
lving
16
016-702

[Cause] PCL print data could not be processed as there was
insufficient print page buffer.
[Remedy] Take one of the following actions.
z
Set [Print Mode] to [Speed Priority].
z
Use Ensure Print.
z
Increase the size of the print page buffer.
z
Add on memory.
For information about print modes and print guarantees, refer to the print
driver's online help. For information about memory, refer to "Allocate
Memory" (P.290).
016-703

[Cause] Mail specifying a non-registered or invalid mailbox No.
was received.
[Remedy] Take one of the following actions.
z Request the sender to register the mailbox with the
specified number.
z Request the sender to send to a valid mailbox.
016-704

[Cause] Documents stored in the mailbox have reached the limit,
and hard disk capacity is insufficient.
[Remedy] Remove unnecessary documents from the mailbox, and
save the document.
Refer to "Printing/Deleting Documents in Mailbox" (P.190).
016-705

[Cause] Unable to register a Secure Print document, because the
HDD kit is not installed.
[Remedy] A HDD kit is needed to use the Secure Print feature.
Refer to "Secure Print" (P.360).
016-706

[Cause] The maximum number of Secure Print users has been
exceeded, and no space is available on the hard disk.
[Remedy] Remove unnecessary documents stored on the printer,
and delete unnecessary Secure Print users.
For information about Secure Print, refer to "Secure Print" (P.360). For
information about mailboxes, refer to "Printing/Deleting Documents in
Mailbox" (P.190).
016-707

[Cause] Unable to sample print, because the HDD kit is not
installed or has malfunctioned.
[Remedy] A HDD kit is needed to use the Sample Print feature. If
the kit is malfunctioning, contact our Customer Support
Center.
016-708

[Cause] Annotation is not possible due to insufficient hard disk
space.
[Remedy] Remove unnecessary data from the hard disk to
increase free disk space.
016-710

[Cause] Unable to register a Delayed Print document, because
the HDD kit is not installed.
[Remedy] A HDD kit is needed to use the Delayed Print feature.
016-711
 
Refer to 016-985.
016-712

Refer to 003-752.
Error Code
Category
Cause and Remedy
C P F S M O