Fuji Xerox Document Centre C250, Руководство пользователя

Страница: 309 / 556

Fax Mode Settings
307
Setups
11
Box Selector - Line Setup
Select whether to use the box selector by receiving line feature.
Using the box selector by receiving line feature, a received document is stored to a
specified mailbox according to the receiving line.
Memory Full Procedure
While scanning an original, if there is insufficient hard disk space, a screen appears,
asking how the partly stored data should be handled. Once a certain time has elapsed
with the confirmation screen displayed, the subsequent processing is determined by
these settings.
You can set the time until the memory full procedure is carried out. For more information, refer to "Auto
Job Release" (P.255).
„
Cancel Job
The stored data is discarded.
„
Run Job
The read-in data is treated as valid, and the part of the original read in is treated as a
complete stored file.
Maximum Stored Pages
Set the maximum number of stored pages of a fax original. You can set a number from
1 to 999 pages.
Mailbox Receive Display Priority 1 to 5
Set the display priority for documents received using mailboxes. The priority levels are
from 1 to 5, and each setting takes these values. For each item, the same setting as
another item can be set.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
File Destination / Output Destination
Set the method of assigning received documents to specified mailboxes, when using
the box selector feature.
1
Select [File Destination / Output
Destination].
2
Select the item to be set or
changed.
File Destination - Line Setup
When you use assignment using the receiving line, the received documents are stored
in mailboxes assigned by receiving line.