Fuji Xerox Document Centre C250, Руководство пользователя

Страница: 95 / 556

Job Assembly
93
Copy
3
Sample Set (Checking the Finished Output of the Copy)
When making multiple sets of copies, you can make a proof set to check the finished
output and then print the remaining copies. After checking the output, select whether
to print the remaining copies or cancel. The number of sets to be copied can also be
changed. The sample is included in the total number of sets.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
1
Select [Sample Set].
2
Select [On].
„
Off
Do not make a sample set.
„
On
Make a sample set.
The machine pauses and displays a confirmation screen after a proof set is copied. To
output the remaining sets, select [Start]. To stop the job, select [Stop].
To change the number of sets, select [Change Quantity] and use the numeric keypad
to input the number of sets.
Document > 50 sheets (Adding Originals)
Use this feature if you have a stack of originals too large for the Document Feeder or
want to scan multiple originals on the Document Glass and copy them as one job.
The [Next Original] message that is usually displayed while scanning documents is
always selected in this mode. If the [Finishing] is set to [Auto], the output is
automatically sorted.
When all documents have been scanned, select [Last Original].
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
1
Select [Document > 50 sheets].
2
Select [On].
„
Off
[Document > 50 sheets] feature is turned off.
„
On
[Document > 50 sheets] feature is turned on.