Fuji Xerox Document Centre C250, Руководство пользователя

Страница: 127 / 556

Send Options
125
Fax
4
„
G3 Auto
Select this mode if the remote machine is G3 compatible. This mode is the one
normally selected.
In accordance with the reception capabilities of the remote machine, the machine
automatically switches modes in the following order of priority: G3 Unique ECM G3
Unique ITU-T G3 ECM ITU-T G3.
„
F4800
Select this mode when transmitting over noisy or poor telephone lines, as can be the
case with overseas calls.
Also select this mode when transmitting over noisy or poor telephone lines
domestically.
„
G4 Auto
Select this mode when relay broadcasting to iFax destinations.
Note • [G4 Auto] is displayed on when an iFax kit is installed. This setting applies the transmission
speed between the fax gateway and destination fax for the iFax.
About F4800
You can communicate with faxes overseas via telephone company exchanges, etc.
Note • The international telephone networks are originally designed for voice communications.
Noise that does not really affect voice communications causes a problem with fax
communications. It may result in the deterioration of images quality, the inability to transmit a
fax, or even terminate the transmission. Regardless of whether transmission is successful,
you are charged for the call once the line is connected. For information about line trouble
and call charges, contact your telephone company.
• If you select [F4800], the transmission time may be longer because transmission is
performed at 4800 bps or less to ensure transmission is successful.
1
Select [Communication Mode] on
the [Send Options] screen.
2
Select [F4800] and [Close].
3
Enter the telephone company ID number, "0011", country code, area code, and
recipient fax number as shown below.
Important • In some areas, you may need to enter a pause after the telephone company ID number.
Telephone
company ID Country
number
Fax number of the
other party
Area code