Fuji Xerox Document Centre C250, Руководство пользователя

Страница: 22 / 556

1 Before Using the Machine
20
Bef
o
re
Using t
h
e
Mac
h
ine
1
WARNING - Electrical Safety Information
z Only use the power cord supplied with the equipment.
z Plug the power cord directly into a grounded electrical outlet easily accessible. Do
not use an extension cord. If you do not know whether an outlet is grounded, consult
a qualified electrician.
z This equipment is to be used on a branch circuit that has larger capacity than rated
ampere and voltage of the machine. See data plate on the rear panel for the rated
ampere and voltage of this equipment. If the machine needs to be moved to a
different location, contact a Fuji Xerox Service Representative or your authorized
local representative or service support organization.
z Improper connection of the equipment-grounding conductor can result in an electric
shock.
z Do not place this equipment where people might step on or trip over the power cord.
z Do not place objects on the power cord.
z Do not override or disable electrical or mechanical interlocks.
z Do not obstruct the ventilation openings.
z Never push objects of any kind into slots or openings on the equipment.
z If any of the following conditions occur, switch off the power to the machine
immediately and disconnect the power cord from the electrical outlet. Call an
authorized local service representative to correct the problem.
- The equipment emits unusual noises or odors.
- The power cord is damaged or frayed.
- A wall panel circuit breaker, fuse, or other safety device has been tripped.
- Liquid has spilled into the equipment.
- The equipment is exposed to water.
- Any part of the equipment is damaged.
Disconnect Device
The power cable is the disconnect device for this equipment. It is attached to the back
of the machine as a plug-in device. To remove all electrical power from the equipment,
disconnect the power cable from the electrical outlet.
Laser Safety Information
CAUTION • Use of controls, adjustments or performance of procedures other than those specified herein
may result in hazardous light exposure.
With specific regard to laser safety, the equipment complies with performance
standards for laser products set by government, national and international agencies as
a Class 1 laser product. It does not emit hazardous light, as the beam is totally enclosed
during all phases of customer operation and maintenance.