Fuji Xerox Document Centre C250, Руководство пользователя

Страница: 301 / 556

Scan Mode Settings
299
Setups
11
„
A/B Series Size
You can select from ten A and B series sizes.
„
Inch Size
You can select from twelve inch series sizes.
„
Others
You can select from thirteen other sizes.
„
Variable Size
You can enter any size. Set the width from 15 to 432 mm, and the height from 15 to 297
mm, in 1 mm increments.
Output Size Defaults
Set the sizes to be displayed at [Output Size] when selecting [Auto %] for scanning
documents at [Reduce/Enlarge] in the [Scan Options] screen.
Any output sizes can be assigned to output size buttons 1 to 8.
By setting the commonly used sizes, you can reduce the number of selection
operations for making a scan.
1
Select [Output Size Defaults].
2
Select the item to be set or
changed, and select [Change
Settings].
Note • Select [ ] to display the
previous screen and select
[
] to display the next screen.
3
Select the setting value.
4
Select [Save].
Reduce/Enlarge Presets
Set the magnifications shown in [Preset %] for [Reduce/Enlarge] in the [Scan Options]
screen.
You can assign any magnification to the R/E Preset buttons 1 to 7 other than [100%].
1
Select [Reduce/Enlarge Presets].
2
Select the item to be set or
changed, and select [Change
Settings].
Note • Select [ ] to display the
previous screen and select
[
] to display the next screen.
3
Select [Preset %] or [Variable].
4
Select the setting value.
5
Select [Save].