Fuji Xerox Document Centre C250, Руководство пользователя

Страница: 510 / 556

17 Appendix
508
App
e
ndix
17
„
Advanced Settings
Coordinate Rotation 104 0 (Default): 0 degree
1: 90 degree
Sets the paper orientation for printing.
Color Mode 105 0 (Default): Color
1: Monochrome
Sets the color mode.
Auto Layout 106 0 (Default): ON
1: OFF
Selects whether aligning the position of the document
and the paper is to be done automatically or not.
Active Palette 107 0 (Default): Command
1: Panel
Selects whether to use a pen specified by command or
set on the panel.
No. of Prints 108 1 - 250 (Default): 1): 1 - 250
Sets the number of prints to be made.
Output Tray 109 0 (Default): Center Output Tray
1: Side Output Tray
80: Finisher Tray
Sets the output tray.
Two-Sided Printing 110 0 (Default): None
1: Head to head
2: Head to toe
Sets the two-sided printing.
[None]...Prints one side.
[Head to Head]...Place the paper as in the [Paper
Orientation], and it prints both sides so that the
orientation of the up-sides are aligned for each page
when the left side is closed.
[Head to Toe]...Place the paper as in the [Paper
Orientation], and it prints both sides so that the
orientation of the up-sides are aligned for each page
when the top side is closed.
Chinese Fonts 111 0: Stroke
Specifies 2-byte character fonts, including Chinese
characters. The setting cannot be changed for this model.
Alphanumeric Fonts 112 0: Stroke
Specifies 1 byte character fonts. The setting cannot be
changed for this model.