Fuji Xerox Document Centre C250, Руководство пользователя

Страница: 448 / 556

16 Problem Solving
446
Probl
em
So
lving
16
No Cause The document is made of highly transparent material like a
transparency.
Action Place a white sheet of paper on the original document and
make a copy.
Cause The document is misaligned.
Action Load the document correctly.
Refer to "Step 1 Loading Documents" (P.46).
Cause The document guides are in an incorrect position.
Action Load the document correctly, and align the document
guides with the edges of the document.
Refer to "Step 1 Loading Documents" (P.46).
Cause The document is a non-standard size.
Action Enter the document size and then copy.
Refer to "Original Size (Specifying the Scan Size for the
Document)" (P.69).
Cause The document is folded or bent.
Action Straighten and properly reset the document.
Refer to "Step 1 Loading Documents" (P.46).
Unable to take color
copies Cause [Output Color] is set to [Black].
No Action Set [Output Color] to [Auto] or [Full Color].
Refer to "Output Color (Selecting the Color to Copy)"
(P.57).
A corner of the copy is cut
off. Cause The document exceeds the printable area.
No Action Adjust the reduce/enlarge to make the copy a little smaller.
Colors differ between the
original and the copy. Cause Tonal reproduction is misconfigured.
No Action Perform gradation adjustment.
Refer to "Executing Auto Gradation Adjustment" (P.424).
Cause A document type appropriate for this document is not
selected.
Action In [Original Type], select a type appropriate for the
document.
Refer to "Image Quality Presets (Selecting Image Quality)"
(P.61).