FSK RHINO 816, Руководство по установке, Страница: 5 / 51

FSK-RAP816-V2015.04 5
Control Panel
The Rhino 816 control panel is an advanced intruder alarm system
with 8 on-board zones and optional on-board wireless transceiver to
allow support for wireless devices. The system is ideally suited to
domestic and small commercial installations.
The system can be further enhanced by using the Rhino GSM
module which provides both remote signalling and UDL
connectivity.
A choice of either LCD or LED remote keypads is available. Other
features include:
f
8 programmable on-board wired zone inputs
f
Another 8 programmable expander wired zone inputs
f
Or 16 Wireless zone inputs
f
4 programmable wired outputs (1 Amp rated)
f
16 programmable wireless outputs
f
On-board wireless transceiver
f
Local or remote upload/download
f
500 event log
f
Advanced system diagnostics
f
1.2 Amp power supply
f
2 serial ports (RhinoBus and USB-Link)
f
Flash upgradable
Remote Keypads
The Rhino 816 will accept up to a maximum of 4 remote keypads. All
remote keypads require a 4-wire connection to the control panel
using standard alarm cable. The following remote keypad models
are available:
Graphic LCD Remote Keypad
The Graphic LCD keypad features a 128 x 64 pixel display for
showing all zone status and system fault messages. A set of
dedicated system status LEDs for Power, Status and Trouble are also
provided. Other features include:
f
4-wire connection using standard alarm cable
f
Internal sounder
f
Blue Backlit keyboard with adjustable brightness
f
Full system programming and diagnostics
LED Remote Keypad
The LED keypad features 16 zone status LEDs for zone status and 7
dedicated system status LEDs for AC, Ready, Armed, Bypass, Chime,
Alarm and Fault. Other features include:
f
4-wire connection using standard alarm cable
f
Internal sounder
f
Backlit keyboard
f
Full system operation (arm, disarm etc.)
The system can only be programmed using a Graphic LCD
keypad or the via the Rhino UDL software.
Wireless Devices
The following wireless devices are available:
Indoor PIR
An indoor 12 metre passive infra-red detector.
Door Contact
A magnetic door contact sensor with an additional zone input for
monitoring other normally closed detectors.
Bidirectional Gate Module
A small module with a single zone input and one output.
Relay Module - 4 Channel
A 4 channel relay module.
Remote Control 6 Button
Key fob for remotely arming, disarming and switching outputs on
and off.
Third Party PIR Interface
A module that interf aces third party PIR’s e.g. Tak ex.
FSK Wireless External PIR
FSK Dual PIR IP65 Small Form Factor External PIR.
Repeater
A module used to extend the range of wireless devices.
FSK USB Serial Adapter (FUSA)
The FUSA provides USB connectivity between the Rhino 816 and the
host computer. It is required when a direct connection is required
between the Rhino UDL software package and the control panel.
Upload/Download Software
Rhino UDL is a Windows® based software package that can be used
to remotely or locally program and diagnose the Rhino range of
security systems. Features include:
f
Simple intuitive user interface
f
Local or remote via modem and IP
f
System remote control
f
Advanced system diagnostics
f
Multi language support