FSK RHINO 816 Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 51

FSK RHINO 816 Скачать руководство пользователя страница 40

40

FSK-RAP816-V2015.04

4.

SMS Commands

SMS Introduction

If system is fitted with a Rhino GSM Module, then users may use the
Short Message Service (SMS text) on their cellular phones to
interact with their alarm system.

SMS messages can be sent to all Sabre Radio Networks modems as
each  modem  has  been  allocated  a  normal  cellular  telephone
number that is accessible from the Public Domain APN. The cellular
telephone  number for the modem is available on the MiRhino app
or  else  can  be  obtained  by  contacting  FSK  Technical  Support  on
011 477 2020 or [email protected].

SMS Control Function

This section covers the remote control of the alarm system via SMS.
The user can perform the following remote control functions by
sending an SMS command to the control panel via their cellular
phone:

SMS Command

Description

ARM

Arms the alarm system *

DISARM

Disarms the alarm system *

STAY

Stay arms the alarms system *

STATE

Request the current status ^

* These options will only function if the relevant User Options are
enabled.

^ This option will only function if outbound SMS messages have
been enabled.

5.

MiRhino App

There is an app available for smart phones to access and control the
Rhino 816 Alarm Panel. The app is available in both Android and
Apple versions. The app will only connect to Rhino 816 alarm panels
that are equipped with Sabre Radio Networks provisioned modems.

In order to use the MiRhino app it is necessary to register the
modem and alarm panel on

https://mirhino.com

. This can be done

by utilising the QR code on the alarm panel housing or else manually
on the web page. Once this is done the user will be issued a User
Name and Password which will allow the smart phone to access the
Sabre Radio Network. Details on how to configure the smart phone
APP are in the MiRhino Web & App Instructions Manual.

«
...
38
39
40
41
42
...
»

Содержание RHINO 816




















































Отзывы:

Нет отзывов