FSK RHINO 816, Руководство по установке, Страница: 37 / 51

FSK-RAP816-V2015.04 37
UDL Options
The set of options controls how the upload/download computer
interacts with the control panel.
Location:
7400
Entry Mode: Enter 4 digit location followed by
Enter
, then use
keys
1
to
2
to toggle options from the list below on or off. When
finished press
Enter
to accept or
Clear
to cancel.
1 Disable UDL when Armed
On: Remote UDL access is disabled when the system is armed.
Off: Remote UDL access is enabled at all times.
2 Disable Online Keypad
On: Remote UDL online keypad operation is disabled.
Off: Remote UDL online keypad operation is enabled.
UDL Password
The UDL password provides communication security with the
remote UDL computer. The UDL password in the control panel must
match the UDL password configured in the Rhino UDL software
package in order to establish a communication link.
Location:
7401
Entry Mode: Enter 4 digit location followed by
Enter
, then key
in the UDL password. When finished press
Enter
to accept or
Clear
to cancel.
The UDL password can be reset to a default setting of
1234 by entering “CLEAR, 6 , ENTER” within 10 seconds of
powering up the system.
UDL IP Address
This is the IP Address of the remote UDL computer.
Location:
7405
Entry Mode: Enter 4 digit location followed by
Enter
, then key
in the IP Address, use
Bypass & 3
to insert a “.”. When finished
press
Enter
to accept or
Clear
to cancel.
UDL IP Port
This is the IP port number of the remote UDL computer.
Location:
7406
Entry Mode: Enter 4 digit location followed by
Enter
, then key
in the UDL port number. When finished press
Enter
to accept or
Clear
to cancel.
UDL Account Number
This is the account number used by the Rhino UDL database. The
Rhino UDL software will automatically assign this when you create a
new account. However, the account number can be manually
entered if required.
Location:
7407
Entry Mode: Enter 4 digit location followed by
Enter
, then key
in the UDL account number. When finished press
Enter
to accept or
Clear
to cancel.
8. System Users
The Rhino 816 has a total of 31 users, this section covers
programming of the system users.
User 00 is the “ Engineer ” which has a default code of
789000
.
User 01 is the “Master” user which has a default code of 1234.
Users 02 to 30 can be programmed to any user type and default to
“Not in Use”.
User Access Code
Each user must be assigned an access code in order to operate the
system; access codes may be 4, 5 or 6 digits in length. This option
allows each user to be assigned an access code.
Locations:
8100
to
8130
Users 00 to 30: Access Code.
Entry Mode: Enter 4 digit location followed by
Enter
, then
key in the user code. When finished press
Enter
to accept or
Clear
to cancel.
User Type
The user type defines the level access the user has in order to
operate the system. This option allows the selected user type to be
assigned. User 00 and User 01 types cannot be changed.
Locations:
8200
to
8230
Users 00 to 30: User Type.
Entry Mode: Enter 4 digit location followed by
Enter
, then key
in a 1 digit user type from the list below or press
i
to scroll through
list. When finished press
Enter
to accept or
Clear
to cancel.
0 Not in Use
The selected user is not in use.
1 Engineer
The selected user is an engineer and can access all options within
the engineer’s program menu.
2 Technician
The selected user is a Technician and can access all options except
the
communication options within the engineer’s program menu.
3 Master
The selected user is a Master user and can access all options within
the user menu.
4 Manager
The selected user is a Manager user and can access all options
within the user menu.
5 Standard
The selected user is a Standard user and can access the following
options from the user menu: “Away Arm”, “Stay Arm”, “ Do walk
Test”, “Change Code” and “View Chime log”.
6 Local Standard
The selected user is a Local Standard user and can access the
following options from the user menu: “Away Arm”, “Stay Arm”,
“Do walk Test” and “Change Code”. This user type can only arm and
disarm areas that are assigned to both their code and keypad. For
example, if the user is assigned to all areas, and keypad 1 is assigned
to area 1, then the user can only arm and disarm area 1 from
keypad 1.