FSK RHINO 816, Руководство по установке, Страница: 30 / 51

30 FSK-RAP816-V2015.04
5 Exit Tones
On: The expander generates exit tones.
Off: The expander will not generate exit tones.
6 Key Press Tones
On: Not supported on the expander.
Off: Not supported on the expander.
7 Advisory Tones
On: The expander generates advisory tones.
Off: The expander will not generate advisory tones.
8 Tamper Tones
On: The expander generates tamper alarm tones.
Off: The expander will not generate tamper alarm tones.
Expander Outputs
The REX10-IO has 10 programmable outputs. This set of options
allows the output type (function) to be assigned to each of the
expander outputs.
Locations:
5201
to
5210
Expander 1: Output 1 to 10 Type.
Entry Mode: Enter 4 digit location followed by
Enter
, then key
in 4 digit output type(See page 31 for a complete list of output
functions) or press
i
to scroll through list. When finished press
Enter
to accept or
Clear
to cancel.
Expander Output Attributes
This set of options allows the output attributes to be assigned to
each of the expander outputs.
Locations:
5301
to
5310
Expander 1: Output 1 to 10 attributes.
Entry Mode: Enter 4 digit location followed by
Enter
, then use
keys
1
to
8
to toggle options on or off. See page 31 for details on
output attributes. When finished press
Enter
to accept or
Clear
to
cancel.
Expander Output Areas
This set of options allows the output areas to be assigned to each of
the expander outputs.
Locations:
5401
to
5410
Expander 1: Output 1 to 10 areas.
Entry Mode: Enter 4 digit location followed by
Enter
, then use
keys
1
to
2
to toggle options from the list below on or off. When
finished press
Enter
to accept or
Clear
to cancel.
1 Area 1
On: The expander output is assigned to area 1.
Off: The expander output is not assigned to area 1.
2 Area 2
On: The expander output is assigned to area 2.
Off: The expander output is not assigned to area 2.
Expander Output Link
Each expander output can be assigned a “Link” number, which in
turn is used to control “Link Control” output types, for details on link
control, see page 33.
Locations:
5501
to
5510
Output 01 to 10: Output Link.
Entry Mode: Enter 4 digit location followed by
Enter
, then key
in a 3 digit link number. When finished press
Enter
to accept or
Clear
to cancel.
Wireless Outputs
The REX10-IO has 10 programmable outputs. This set of options
allows the output type (function) to be assigned to each of the
expander outputs. All are programmed or not used by default.
Locations:
5211
to
5226
Expander 1: Output 1 to 10 Type.
Entry Mode: Enter 4 digit location followed by
Enter
, then key
in 4 digit output type(See page 31 for a complete list of output
functions) or press
i
to scroll through list. When finished press
Enter
to accept or
Clear
to cancel.
Wireless Output Attributes
This set of options allows the output attributes to be assigned to
each of the expander outputs. All are programmed as
Not Used by
default.
Locations:
5311
to
5326
Expander 1: Output 1 to 10 attributes.
Entry Mode: Enter 4 digit location followed by
Enter
, then use
keys
1
to
8
to toggle options on or off. See page 31 for details on
output attributes. When finished press
Enter
to accept or
Clear
to
cancel.
Wireless Output Areas
This set of options allows the output areas to be assigned to each of
the expander outputs.
Locations:
5411
to
5426
Expander 1: Output 1 to 10 areas.
Entry Mode: Enter 4 digit location followed by
Enter
, then use
keys
1
to
2
to toggle options from the list below on or off. When
finished press
Enter
to accept or
Clear
to cancel.
1 Area 1
On: The expander output is assigned to area 1.
Off: The expander output is not assigned to area 1.
2 Area 2
On: The expander output is assigned to area 2.
Off: The expander output is not assigned to area 2.
Wireless Output Link
Each expander output can be assigned a “Link” number, which in
turn is used to control “Link Control” output types, for details on link
control, see page 33.
Locations:
5511
to
5526
Output 01 to 10: Output Link.
Entry Mode: Enter 4 digit location followed by
Enter
, then key
in 3 digit link number. When finished press
Enter
to accept or
Clear
to cancel.