FSK RHINO 816, Руководство по установке, Страница: 27 / 51

FSK-RAP816-V2015.04 27
Entry Mode: Enter 4 digit location followed by
Enter
, then use
keys
1
to
4
to toggle options from the list below on or off. When
finished press
Enter
to accept or
Clear
to cancel.
1 Global Keypad Information
On: The area and zone status information displayed on the system
remote keypads is global, i.e., all keypads show the same
information.
Off: The area and zone status information displayed on the
system remote keypads is local, e.g., if the keypad is assigned
to area 3, then only information relating area 3 is displayed.
2 EXP Lost = Zone Tamper
On: When a zone expander is disconnected from the network,
each programmed zone on the expander generates a tamper
response.
Off: When a zone expander is disconnected from the network, the
system only generates an expander lost response.
3 Disable Armed Bypass
On: Zones cannot be bypassed once the system is armed.
Off: Zone may be bypassed at any time.
4 Reinstate Force Bypassed Zones
On: If a zone is automatically force bypassed and subsequently
becomes healthy whilst the system is armed. The zone is
reinstated and can cause an alarm if activated.
Off: Force bypassed zones remain bypassed until the system is
disarmed.
Control Timers
The Rhino 816 has five programmable Control Timers, each timer
has a switch on time (On Time), switch off time (Off Time) and days
of operation for both the On and Off times. Control Timer can be
used to automatically arm the system or lock users from accessing
the system. The control timer can also
be assigned a “Link” number,
which in turn is used to control “Link Control” output types, for
details on link control, see page 33.
Locations:
3501
to
3505
Control Timers 1 to 5: On Time.
3511
to
3515
Control Timers 1 to 5: Off Time.
Entry Mode: Enter 4 digit location followed by
Enter
, then key
in 4 digit time in a 24hour format, e.g., 17:15. When finished press
Enter
to accept or
Clear
to cancel.
Locations:
3521
to
3525
Control Timers 1 to 5: On Time Days.
3531
to
3535
Control Timers 1 to 5: Off Time Days.
Entry Mode: Enter 4 digit location followed by
Enter
, then use
keys
1
to
7
to toggle days (Sunday = 1) on or off. When finished
press
Enter
to accept or
Clear
to cancel.
Locations:
3541
to
3545
Control Timers 1 to 5: Link.
Entry Mode: Enter 4 digit location followed by
Enter
, then key
in 3 digit link number. When finished press
Enter
to accept or
Clear
to cancel.
Banner Text
This set of options allows you to customise the text that is displayed
on LCD keypads. The “Keypad Banner” is displayed on the top line
when the system is disarmed. The “Engineer Reset Banner” is
displayed on the bottom line when the system requires an engineer
to reset the system. The top line will always show “Call Engineer”.
Locations:
3604
- Keypad Banner: Default is Rhino 816
3605
- Engineer Reset Banner: Default is Call Engineer
Entry Mode: String Edit - Text Mode (see page 17).
Remote Control Labels
This set of options allows you to customise the text label that is
displayed on LCD keypads for each remote control output. When
the user accesses the remote control output menu, the labels are
displayed, e.g. “Garden Lights”.
Locations:
3621
to
3625
Remote Control 1 to 5: Labels.
Entry Mode: String Edit - Text Mode (see page 17).
Area Labels
This set of options allows you to assign a text label for each area,
e.g., “Shop floor” for area 1. The area label can be d isplayed when
the user arms and disarms the system or it can also be displayed
when programming zone, keypad, expander and user area options.
Locations:
3611
to
3612
Areas 1 to 2: Text Labels.
Entry Mode: String Edit - Text Mode (see page 17).
System Links
Each system output can be assigned a “Link” number, which in turn
is used to control the “Link Control” output types, for details on link
control, see page 33.
Locations:
3901
to
3962
System Outputs 01 to 62: Link.
Entry Mode: Enter 4 digit location followed by
Enter
, then key
in 3 link number. When finished press
Enter
to accept or
Clear
to
cancel.
The table below shows the system output types and their
corresponding number 01 to 62. For details of each system output
function, please see page 31.
System Link Types
01 = AC Fault
02 = Reserved
03 = System Open
04 = System Armed
05 = System Part Armed
06 = System Armed/Alarm
07 = Bell
08 = Strobe
09 = Intruder Alarm
10 = Confirmed Alarm
11 = Alarm Abort
12 = Fire Alarm
13 = PA Alarm
14 = Duress Alarm
15 = 24hr Alarm
16 = Medical Alarm
17 = Tamper Alarm
18 = Ready for Arming
19 = Trouble
20 = Alert