FSK RHINO 816, Руководство по установке, Страница: 29 / 51

FSK-RAP816-V2015.04 29
1 Alarm Tones
On: The selected keypad generates alarm tones.
Off: The selected keypad will not generate alarm tones.
2 Trouble Tones
On: The selected keypad generates trouble tones.
Off: The selected keypad will not generate trouble tones.
3 Chime Tones
On: The selected keypad generates chime tones.
Off: The selected keypad will not generate chime tones.
4 Entry Tones
On: The selected keypad generates entry tones.
Off: The selected keypad will not generate entry tones.
5 Exit Tones
On: The selected keypad generates exit tones.
Off: The selected keypad will not generate exit tones.
6 Key Press Tones
On: The selected keypad generates key press tones.
Off: The selected keypad generates a short click tone when keys
are pressed.
7 Advisory Tones
On: The selected keypad generates advisory tones.
Off: The selected keypad will not generate advisory tones.
8 Tamper Tones
On: The selected keypad generates tamper alarm tones.
Off: The selected keypad will not generate tamper alarm tones.
Keypad Areas
Keypads must be assigned to one or more areas to ensure correct
operation of the system. The keypad areas control the following:
f
When the system is exit mode only the keypads in the areas
that are being armed will generate the exit tone.
f
When arming one or more areas from a keypad, only the
arming modes for the area(s) that are assigned to keypad are
applied. The areas that are not assigned are armed instantly.
For example, if the keypad is assigned to area 2, and a user
request to arm all areas, area 1 arms instantly and the exit
mode for area 2 is applied e.g. 30 seconds exit delay.
f
When using a “Local Standard” user only the areas assigned to
keypad can be armed and disarmed.
f
When a lid tamper is activated from the keypad, the tamper
alarm is generated for the area(s) assigned to keypad.
Locations:
4141
to
4142
Keypads 1 to 2: Areas.
Entry Mode: Enter 4 digit location followed by
Enter
, then use
keys
1
to
2
to toggle area 1 or 2 on or off. When finished press
Enter
to accept or
Clear
to cancel.
5. Expander Configuration
This section covers programming of the expander module. The
Rhino 816 will only accept one expander module (REX10-IO or
REX10-I). The expander MUST be set to address 1.
Expander Areas
Expanders must be assigned to one or more areas to ensure correct
operation of the system. The expander areas control the following:
f
When the system is exit mode only the expander in the areas
that are being armed will generate the exit tone.
f
When a lid tamper is activated from the expander, the tamper
alarm is generated for the area(s) assigned to expander.
Locations:
5101
to
5102
Expander 1 to 2: Areas.
Entry Mode: Enter 4 digit location followed by
Enter
, then use
keys
1
to
2
to toggle options from the list below on or off. When
finished press
Enter
to accept or
Clear
to cancel.
1 Area 1
On: The expander is assigned to area 1.
Off: The expander is not assigned to area 1.
2 Area 2
On: The expander is assigned to area 2.
Off: The expander is not assigned to area 2.
Expander Options
This set of options controls how the expander tamper and internal
piezo sounder function.
Location:
5111
Entry Mode: Enter 4 digit location followed by
Enter
, then use
keys
1
to
2
to toggle options from the list below on or off. When
finished press
Enter
to accept or
Clear
to cancel.
1 Enable Tamper
On: The lid tamper on the expander is monitored.
Off: The lid tamper on the expander is not monitored.
2 Enable Piezo
On: The internal piezo sounder on the REX10-IO expander is
enabled.
Off: The internal piezo sounder on the REX10-IO expander is
disabled.
Expander Sounds
This set of options controls how the REX10-IO expander generates
sounds from its on-board piezo sounder and loudspeaker output.
Location:
5121
Entry Mode: Enter 4 digit location followed by
Enter
, then use
keys
1
to
8
to toggle options from the list below on or off. When
finished press
Enter
to accept or
Clear
to cancel.
1 Alarm Tones
On: The expander generates alarm tones.
Off: The expander will not generate alarm tones.
2 Trouble Tones
On: The expander generates trouble tones.
Off: The expander will not generate trouble tones.
3 Chime Tones
On: The expander generates chime tones.
Off: The expander will not generate chime tones.
4 Entry Tones
On: The expander generates entry tones.
Off: The expander will not generate entry tones.