FSK RHINO 816 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 51

FSK RHINO 816 Скачать руководство пользователя страница 12

12

FSK-RAP816-V2015.04

Loudspeaker Connections

The Rhino 816

has a loudspeaker output capable of driving one 16Ω

or two 8

Ω wired in series as shown below:

The volume level can be programmed, please refer to page 25 for
details. The loudspeaker can also be tested, please refer to page 25
for further details.

External Sounder/Strobe Connections

The following connections are available for connection to an
external sounder/strobe unit:

0V

0V supply. Connect to the 0V (-) supply on the external
sounder/strobe unit.

+12

Positive 12V supply, which is protected by an auto resetting fuse
(PTC) rated at 1.1A. Connect to the +12V (+) supply on the external
sounder/strobe unit.

Bell (1)

Panel output 1 is pre-configured for Bell operation, i.e. it switches to
0V when active. Connect this terminal to the bell trigger input on
the external sounder/strobe unit.

Strobe (2)

Panel output 2 is pre-configured for Strobe operation, i.e., it
switches to 0V when active. Connect this terminal to the strobe
input on the external sounder/strobe unit.

Panel Outputs 1 - 4

The control panel has four programmable outputs, which can be
used to drive auxiliary devices such as LEDs, sounders or relays etc.
(see page 31 for details on programming outputs). Each panel
output is rated at 1 Amp and switches to 0V when active. The figure
bellow shows some wiring examples:

«
...
10
11
12
13
14
...
»

Содержание RHINO 816




















































Отзывы:

Нет отзывов