FSK RHINO 816, Руководство по установке, Страница: 38 / 51

38 FSK-RAP816-V2015.04
7 Arm Only
The selected user is an Arm Only user and can only access the
arming options within the user menu.
8 Duress
The selected user is a Duress user and operates the same as a
standard user, however, on entering the access code a silent duress
alarm is generated and if programmed, the event is signalled to
alarm receiving centre.
9 Access Control
The selected user is an Access Control user and on entering the
access code the relevant
“U ser Access ” output is activated for the
duration of the “ User Access” timer, see page 25.
9 Access Latching
The selected user is an Access Control user and on entering the
access code the relevant “User Access” output is activated and
remains latched. On entering the code again, the output is
deactivated.
User Locked By
The user access can be locked out by the use of a “Link Controlled”
output (see page 33 ). The “Link Control” output can be configured
to switch on by various link input conditions, e.g., “Link Control 01”
could be programmed to operate when Control Timer 2 is active.
This means that the user access code is disabled when the selected
“Link Control” output is on and can be u sed for locking out selected
users for particular conditions, e.g. you may want to prevent a user
from accessing the system over the weekend.
Locations:
8300
to
8330
Users 00 to 30: User Locked By.
Entry Mode: Enter 4 digit location followed by
Enter
, then
key in a 3 digit link number. When finished press
Enter
to accept or
Clear
to cancel.
User Name
Each user can be assigned an 8 character label that is displayed on
LCD remote keypads when viewing the system event log.
Locations:
8400
to
8430
Users 00 to 30: User Name.
Entry Mode: String Edit - Text Mode (see page 17).
User Link
Each user can be assigned a “Link” number, which in turn is used to
control “Link Control” output types, for details on link control, see
page 33.
Locations:
8500
to
8530
Users 00 to 30: User Link.
Entry Mode: Enter 4 digit location followed by
Enter
, then
key in a 3 digit link number. When finished press
Enter
to accept or
Clear
to cancel.
User Areas
Each user must be assigned to one or more areas in order for them
to access the required area of protection. Users that are assigned to
multiple areas will be given the option to select the areas they want
to arm or disarm.
Locations:
8600
to
8610
Users 00 to 10: Areas.
Entry Mode: Enter 4 digit location followed by
Enter
, then use
keys
1
to
2
to toggle area 1 or 2 on or off. When finished press
Enter
to accept or
Clear
to cancel.
9. Utilities
This section covers the programming of the system utilities.
Time and Date
The system has a real time clock that must be programmed so that
the time and date is recorded correctly in the system event log. The
time and date is also displayed on the bottom line of the LCD
keypad.
Locations:
9001
- Hours.
9002
- Minutes.
9003
- Seconds.
9004
- Day.
9005
- Month.
9006
- Year.
Entry Mode: Enter 4 digit location followed by
Enter
, then
key in a 2 digit value. When finished press
Enter
to accept or
Clear
to cancel.
User Menus
The engineer can access the user menus without exiting the
engineer
’ s program mode by entering
91 Enter
from expert mode.
The table below shows the user menu options and the command
number used to access them.
Group Command Function
Arming
1
2
3
4
Stay Arm 1
Stay Arm 2
Stay Arm 3
Away Arm
Chime Log
5
Show Chime Log
Event Log
6
Show Event Log
Notifications
7 Clear Notifications
Users
8
Change code
System Tests
9
Start Walk Test
Stay Arm 1 1
Selecting this option will cause the system to start the exit mode
and attempt to stay arm (1) the system. To cancel or disarm simply
enter a valid user code.
Stay Arm 2 2
Selecting this option will cause the system to start the exit mode
and attempt to stay arm (2) the system. To cancel or disarm simply
enter a valid user code.
Stay Arm 3 3
Selecting this option will cause the system to start the exit mode
and attempt to stay arm (3) the system. To cancel or disarm simply
enter a valid user code.