FSK RHINO 816, Руководство по установке, Страница: 26 / 51

26 FSK-RAP816-V2015.04
Off: The output is not monitored.
2 Panel Output 2 (Strobe)
On: The output is monitored for faults.
Off: The output is not monitored.
3 Panel Output 3
On: The output is monitored for faults.
Off: The output is not monitored.
4 Panel Output 4
On: The output is monitored for faults.
Off: The output is not monitored.
Hardware - Monitoring
This set of options allows the monitoring of the control panel
hardware to be enabled or disabled.
Location:
3311
Entry Mode: Enter 4 digit location followed by
Enter
, then use
keys
1
to
7
to toggle options from the list below on or off. When
finished press
Enter
to accept or
Clear
to cancel.
1 Panel Box Tamper
On: The box tamper is monitored for activity.
Off: The box tamper is not monitored.
2 Auxiliary Fuse
On: The auxiliary 12V fuse is monitored for faults.
Off: The auxiliary 12V fuse is not monitored.
3 System Voltage
On: The system voltage is monitored for faults.
Off: The system voltage is not monitored.
4 Battery Presence
On: The standby battery is monitored for its presence.
Off: The standby battery is not monitored.
5 Mains AC
On: The mains supply is monitored for its presence.
Off: The mains supply is not monitored.
6 Reserved
Do not use.
7 Bell Tamper
On: The bell tamper input is monitored for activity.
Off: The bell tamper input is not monitored.
Speaker Sounds
This set of options controls the sounds generated from control
panel loudspeaker output (O/P4).
Location:
3312
.
Entry Mode: Enter 4 digit location followed by
Enter
, then use
keys
1
to
8
to toggle options from the list below on or off. When
finished press
Enter
to accept or
Clear
to cancel.
1 Alarm Tones
On: The loudspeaker generates alarm tones.
Off: The loudspeaker will not generate alarm tones.
2 Trouble Tones
On: The loudspeaker generates trouble tones.
Off: The loudspeaker will not generate trouble tones.
3 Chime Tones
On: The loudspeaker generates chime tones.
Off: The loudspeaker will not generate chime tones.
4 Entry Tones
On: The loudspeaker generates entry tones.
Off: The loudspeaker will not generate entry tones.
5 Exit Tones
On: The loudspeaker generates exit tones.
Off: The loudspeaker will not generate exit tones.
6 Key Press Tones
On: Not applicable for loudspeaker output.
Off: Not applicable for loudspeaker output.
7 Advisory Tones
On: The loudspeaker generates advisory tones.
Off: The loudspeaker will not generate advisory tones.
8 Tamper Tones
On: The loudspeaker generates tamper alarm tones.
Off: The loudspeaker will not generate tamper alarm tones.
Configuration 1
This set of options allows the system operation and features to be
altered.
Locations:
3401
Entry Mode: Enter 4 digit location followed by
Enter
, then use
keys
1
to
8
to toggle options from the list below on or off. When
finished press
Enter
to accept or
Clear
to cancel.
1 Reserved
Do not use.
2 Battery Test by Control Timer 5 and Disarm
On: The battery test feature is invoked when Control Timer 5
switches on and every time the system is disarmed.
Off: The battery test feature is performed by the “B attery Test
Period” timer .
3 Reinstate Bypassed Zones on Disarm
On: Any zones that have been manually bypassed are
automatically reinstated when the system is disarmed.
Off: Bypassed zones remain bypassed after the system is disarmed.
4 Reserved
Do not use.
5 Power-Up Clears all Zones to Healthy
On: On power-up all zones report as healthy even if they initially
active.
Off: On power-up all zones report as normal.
6 Chime on Zone Restore
On: Chime zones generate a tone on activation and restore.
Off: Chime zones only chime on activation.
7 Tamper Alarms are Engineer Reset
On: Tamper alarms require an engineer to reset the system.
Off: The user can reset tamper alarms.
8 Show Active Zones when Disarmed
On: Zone activity is displayed when the system is disarmed.
Off: Zone activity is not displayed.
Configuration 2
This second set of configuration options further allow the system
operation and features to be altered.
Locations:
3402