Franklin Electric Cerus X-Drive, Инструкция по установке и эксплуатации

Страница: 113 / 156

MAINTENANCE
Fan Replacement
113
Frame G Heat Sink Fan
1. Remove four screws and remove the lower cover. When replacing screws, tighten to a torque of 10.4 to
13 in. lbs. (1.18 to 1.47 Nm).
2. Remove eight screws from the top cover. When replacing screws, tighten to a torque of 30 to 34.5 in.
lbs. (3.4 to 3.9 Nm).
3. Remove two screws from the bottom of the upper front cover. When replacing screws, tighten to a
torque of 12 to 14 in. lbs. (1.37 to 1.57 Nm).
Remove upper front cover.
4. Release clip and disconnect fan power connector.
5. Remove three screws from fan. When replacing the screws, tighten to a torque of 12 to 14 in. lbs. (1.37 to
1.57 Nm).
6. Remove protective covers and pull out the fan by placing fingers through the lifting holes.