OMNI-400/OMNI-400EU and OMNI-600/OMNI-600EU Installation and Setup Guide
4-4
•
The system must have the open/close enable set by using the #8 command (see below).
•
The phone number must be enabled (Submode 1, Question 04).
•
The page attempts option must be set (Submode 1, Question 10, L3).
User Enables and Options:
#8 – Allows the end user to turn on or off open and close pages. This will not affect alarm and trouble
pages if enabled. Also, the installer must have enabled opens and/or closes to page.
LCD – Displays if open/close pages are on/off. Press [#] to toggle, press [
✱
] to exit.
LED/Fixed Word – Toggles if open/closes will send a page.
#58 [code]† – End user function to change the pager number. This mode times out in 10 seconds
without saving the phone number if no key is pressed, or exits without saving if the [
✱
] key is pressed.
† Entry of the user code is optional.
Key functions:
[
✱
] Key – Exits mode without saving.
[#] Key – Saves new phone number and blanks digits from last digit entered to end
[Code] key – Enters a
$
C
#
in the string, which gives an additional 2-second pause.
LCD – Displays 16-digit phone number. Enter new phone number and press [#] to save, or press [
✱
] to
exit.
For LCD pads, press another key after saving the number, and the #8 user pages enable is displayed.
LED/Fixed Word – “ACK” sound heard. Enter the phone number using digits 0–9 and press [#] to
save, or press [
✱
] to exit.
Installer Pager Options:
Submode 1, Question 14, L4: Contains the pager options and the open/close enable that may be
disabled by the #8 command.
Paging/Beeps Sequence: The paging will not begin until the dialer is off and dialer delay is not
active. The system checks if any event needs to be dialed. The page/beeps are dialed 1, 2, or 3 times. If
pager attempts are 0, paging is disabled. The pager format is as follows:
Account Event Zone/User
Terminator
1234
[0, 1, or 9]
[000-255]
[#]
where: Opening
=
0
Closing = 1
Alarm or Trouble = 9
This data is transmitted 2 times with a 5-second pause between rounds.
Содержание OMNI-400 EU
Страница 6: ...vi ...
Страница 36: ...OMNI 400 OMNI 400EU and OMNI 600 OMNI 600EU Installation and Setup Guide 5 16 ...
Страница 78: ...OMNI 400 OMNI 400EU and OMNI 600 OMNI 600EU Installation and Setup Guide 6 42 ...
Страница 90: ...OMNI 400 OMNI 400EU and OMNI 600 OMNI 600EU Installation and Setup Guide 9 2 ...