FBII OMNI-400 EU, Инструкция по установке и настройке

Страница: 60 / 96

OMNI-400/OMNI-400EU and OMNI-600/OMNI-600EU Installation and Setup Guide
6-24
Q 13, L2
— Enter the L2 digit from the table below.
L2
Entry
No Code
Set Time Daylight Saving
(Summer) Time
Keypad
Extinguish
Enable #58
Follow Me
0
1 ✔
2 ✔
3 ✔ ✔
4
✔
5 ✔ ✔
6 ✔ ✔
7 ✔ ✔ ✔
8 ✔
9 ✔ ✔
A ✔ ✔
B
✔ ✔ ✔
C
✔ ✔
D ✔ ✔ ✔
E ✔ ✔ ✔
F ✔ ✔ ✔ ✔
No Code Set Time: If selected, allows
Quick Command #3 to set time, #54 to set
auto-arm time, #52 to show auto-arm
time, and #58 Follow Me without entering
a User Code. Intended for low-security
installations.
Daylight Saving (Summer) Time: If
selected, the system will automatically
adjust for daylight saving (summer) time
(U.S. standard: First Sunday in April at
2:00 AM, the clock goes ahead 1 hour; last
Sunday in October at 2:00 AM, the clock
goes back 1 hour to standard time).
Keypad Extinguish: If selected, the
keypad display and LEDs will turn off
after 1 minute of no key presses.
Enable #58 Follow Me: If selected,
enables the #58 Quick Command. The #58
Quick Command is used to modify the
pager telephone number from the keypad.
Q 13, L3 — This location selects the type of clock displays. Enter the L3 digit from the table below.
Clock Day/Month
L3
Entry AM/PM 24hr mm/dd dd/mm
Display
Time
Display
Clock Fail
0 ✔ ✔
1 ✔ ✔
2
✔ ✔
3
✔ ✔
4 ✔ ✔ ✔
5 ✔ ✔ ✔
6 ✔ ✔ ✔
7 ✔ ✔ ✔
8
✔ ✔ ✔
9
✔ ✔ ✔
A ✔ ✔ ✔
B ✔ ✔ ✔
C ✔ ✔ ✔ ✔
D ✔ ✔ ✔ ✔
E ✔ ✔ ✔ ✔
F ✔ ✔ ✔ ✔
Clock: Shows time in 24-hour format, 00–
23 hours. Otherwise, 1–12 hours with A or
P.
Day/Month: Time displayed as day, then
month (23, Feb. 1999); otherwise, as U.S.
standard (Feb. 23, 1999).
NOTE: Clock set is always entered as 24-
hour time. See Quick Command #3.
Display Time: LCD only. Displays time
(last six digits) during status scroll on line
2.
NOTE: The system descriptor should be
limited to 10 characters when time is
displayed or it will be overwritten by the
time.
Display Clock Fail: LCD only. If the
system goes through a hardware reset (loss
of all power or watchdog reset), the clock
will not be correct and a message will be
displayed indicating this.