manualshive.com logo in svg

FBII OMNI-400 EU, Инструкция по установке и настройке

Поделиться
Скачать
FBII OMNI-400 EU Скачать руководство пользователя страница 33

Section 5.  System Operation 

 

 

5-13 

DISPLAY AUTO-ARM TIME (LCD KEYPADS ONLY): # 52  

If auto-arming is programmed, pressing [#] [5] [2] displays the current auto-arm time for the current 
area on the LCD keypads.  

NOTE:

 Auto-arming is enabled in programming Submode 1, Question 20, 

L1 and the auto-arm time is set by using [#] [5] [4]. The keypad displays: 

AUTO ARM TIME: 
 12:00AM

 

The system exits this mode either automatically (no keys pressed), or when the star [

✱

] key is pressed. 

SET AUTO-ARM TIME: # 54 

If auto-arming is enabled in programming Submode 1, Question 20, pressing [#] [5] [4] will set the 
auto-arm time. If a user code is required to set the time, then enter: 

[#] + [5] + [4] + USER + HOUR + MINUTE 

where:  USER 

Valid 4- or 6-digit user code 

HOUR 

Two-digit hour of day in 24 hour format; e.g., 7AM = 07; 3PM = 15 

MINUTE  Two-digit minutes of hour; e.g., 9 min = 09; 29 min. = 29 

If a user code is not required to set the time, then enter: 

[#] + [5] + [4] + HOUR + MINUTE 

In either case, the LCD keypads will display a prompt for each entry. On LED keypads, the sounder 
will beep after each entry. The auto-arm time represents the time of day that the panel will 
automatically arm if it is not already armed. In addition, it can be programmed to arm in the STAY or 
INSTANT mode and an audible warning (4 quick beeps) can be generated at the keypad starting 3 
minutes prior to arming, if programmed in Submode 1, Question 20, L1. This signal (which reoccurs 
once every minute) warns the occupants that the system will auto-arm in 3 minutes. If a user code is 
entered within this warning period and the system is disarmed, the auto-arm time for that day will be 
canceled. The system will generate an audible acknowledgment (1-second keypad sounder) and the 
lights on the LED display will scroll to show that the auto-arm time was suspended. LCD-based 
keypads will display “AUTO-ARM CANCELED.” 

The system will exit this mode either automatically (no keys pressed) after the last entry (MINUTE), or 
when the star [

✱

] key is pressed.  

NOTE: Auto-arming will arm the system and bypass any zones that are not ready. Therefore, we 
recommend that you report bypasses to the CS if auto-arming is programmed. Auto-arming is not 
suitable for UL applications. 

UL

 

Auto arming is not suitable for UL applications. 

 

LOSS-OF-TIME WARNING:

 If auto-arming has been enabled and no time is defined, a warning will 

appear on the keypads if enabled in Submode 1, Question 13, Location 3. This can occur if time (#3 
command) has not been entered or if the system has totally lost power (AC and DC) and the time is 
probably incorrect. The loss-of-time warning consists of the LEDs on the keypads scrolling in 
sequence or a text message on LCD keypads. This will occur every 30 seconds until the time is set. 

Содержание OMNI-400 EU

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды