FBII OMNI-400 EU, Инструкция по установке и настройке

Страница: 59 / 96

Section 6. System Programming
6-23
Q 12, L4 — Selects whether you want the system to sound upon the listed conditions. This option does
not affect keypad display of these events.
Enter the L4 digit from the table below.
L4
Entry
Low-
Battery
Sounder
AC Loss
Sounder
0
4
✔
8 ✔
C ✔ ✔
System Low-Battery Sounder: Setting this option starts a pulsing
keypad trouble sounder. Valid user code silences sounder. May be
enabled to send system low battery message to the CS (Submode 2,
Question 20, L3, L4).
AC Loss Sounder: Setting this option starts a pulsing keypad trouble
sounder. Valid user code silences sounder. May be enabled to send AC
loss message to the CS (Submode 2, Question 19, L3, L4).
UL
Must be programmed as “C” for UL installations.
Any time the sounder is on, it must be acknowledged with a user code before arming is allowed. If the
system is armed and a trouble sounder starts, the system will disarm and silence the sounder.
QUESTION 13 DISPLAY OPTIONS N/U
L1 L2 L3 L4
This question defines display options. Enter the digits as follows:
Q 13, L1 — Enter the L1 digit from the table below.
L1
Entry
Armed
Bypass
Display
Display
Fault On
Entry
No AC
Loss
Display
Manual
Bypass
Limit 3
0
1 ✔
2 ✔
3 ✔ ✔
4
✔
5 ✔ ✔
6 ✔ ✔
7 ✔ ✔ ✔
8 ✔
9 ✔ ✔
A ✔ ✔
B
✔ ✔ ✔
Armed Bypass Display: If selected, pressing the
[BYPASS] key will scroll bypassed zones while the
system is armed.
Display Fault on Entry: Display faults (open
zones) during entry delay time.
No AC Loss Display: If selected, the AC loss
message will not be displayed on LCD keypads.
Manual Bypass Limit 3: If selected, no more than
3 zones can be manually bypassed.
C ✔ ✔
D ✔ ✔ ✔
E ✔ ✔ ✔
UL
Do not enable No AC Loss Display (must
display AC loss) for UL installations.
F ✔ ✔ ✔ ✔