FBII OMNI-400 EU, Инструкция по установке и настройке

Страница: 47 / 96

Section 6. System Programming
6-11
Summary of System Programming
Installer Mode 1: Programming Questions
This section defines the programming questions and the values for each question. You should complete
the SYSTEM PROGRAMMING WORKSHEET (insert) before entering data.
Programming Submode 1: SYSTEM OPTIONS
Enter Installer Programming mode, then press [1] at the submode prompt to enter System Options
submode.
QUESTION 00 INSTALLER CODE N/U N/U
L1 L2 L3 L4 L5 L6 L7 L8
NOTE: When Programming Submode 1 is entered, the system automatically displays Question 01. To
display this question for review and/or modification of the Installer Code, enter [
✱
] + [0] + [0].
Enter the 4- or 6-digit Installer Code in Question 00, Locations L1 – L4 for a 4-digit code or L1–L6 for a
6-digit code. When using a 4-digit code, L5 and L6 may be left at the default value of “0.”
IMPORTANT: When using a 6-digit code, enter the third through sixth digits of the code in L1–L4,
respectively, and the first and second digits in L5 and L6, respectively. For example:
4-digit code of 1234 – enter 1 2 3 4
L1 L2 L3 L4 L5 L6
6-digit code of 123456 – enter
3 4 5 6 1 2
L1 L2 L3 L4 L5 L6
Note that if the system is set for 4-digit codes and you enter a 6-digit code, the first two digits of the
code (L5 and L6) are stored into memory but will not become active until the system is set for 6-digit
codes (Submode 1, Question 9, L3) and the programming mode ends.
QUESTIONS 01–04 TELEPHONE and PAGER NUMBERS
Enter the telephone number (including area code and/or dialing prefix, IF NECESSARY) of the primary
central station receiver in Question 01, L1–L20.
Example: If the primary telephone number to be entered is 1-516-123-4567, enter (on Programming
Worksheet): 15161234567.
Enter the valid digits from the table that follows.
Entry Function Comments
0–9 0–9
A Signifies end of the phone number Enter after last digit of phone number
B
Star (
✱
)
Enter whenever the star is used
C 3-Second pause Provides delay to wait for dial tone
D Pound (#) Enter whenever the pound is used
E ✱
70C (TouchTone)
✱
1170C (Rotary)
Enter to disable Call Waiting
F 800 Enter to dial 800