TE-6201-W series
Fiber Optic Fusion Splicing Machine Operation Manual
Main Features:
4.3 inches high resolution colorful LCD display, image can be turned
according to position
Average splice time: 6 second
Average tube-heat time: 30 second
Lithium battery: Rechargeable and up to 220 times of continuous
splice and heat after fully charged
Separately X or Y axis views with 520 times magnification and
Cutting-edge technology for image processing
New core alignment technology, the core alignment is more accurate
New developed technology provid
es
strong wind and dust resistance
Working mode
：
Auto & Manual & Full-Auto
Micro USB Port
Storing 6,000 groups of latest splice results.
Multipurpose optical fiber fixture ( 3-in-1 fixture and SC/LC/FC
connector fixture, patented technology)
Specifications
：
Model no.
TE-6201A-W
TE-6201F-W
Applicable fiber
SM
，
MM
，
NZDS, EDF
Average splice loss
0.02dB(SM)
，
0.01dB(MM), 0.04dB(NZDS),
0.04dB(ED)
Splice time
6s (SM)
Suitable for cutting
optical fiber length
10
～
16mm
Suitable for optical
fiber core
Cladding diameter:80-
150μm,
Coating diameter:100-
1000μm
Return lose
≧
60dB
Fiber image
magnification
520 times X or Y view; 200 times X and Y
views
Tension test
2.0N(200gf)(standard)
Splice program
50 groups
Electrode life
5000 times
Protection sleeve
length
20mm~60mm
Storage of splice result 6000 groups of splice results
Monitor
4.3 “high resolution colorful LCD
Communication port
Micro USB
Working light
1 LED light
Power indication
5 LED indication
Operation condition
Temperature: -10~+50
℃
Humidity
：
0~95%RH
altitude
：
0~5000m
Standard plug
A type
F type
Power supply
Lithium battery: 11.1V/5.2A
Adapter: Input AC 100~240 50/60Hz;
Output: DC15V/5A
Dimension(W x D x H) 145 x 132x 142mm
Weight
1.7Kgs (include battery)
1.35Kgs(not include battery)
Package :
1. Machine x 1pc
2. AC adaptor x 1pc
3. Optical fiber splicing fixture (3-in-1) x1 set
4. Battery x 1pc
5. Spare electrodes x 1set
6. Protection sleeve(60mm) x 25pcs
7. Cooling tray x 1pc
8. Operation manual x 1pc
9. Carrying belt x 1pc
10. Carrying case with strap x 1pc
11. Disk (with communication program, driver and Instructions)
Quick Reference Guide
The guide is for the basic operation. For the detailed information, please
refer to https: www.prokits.com.tw.
1.
Power supply: Two ways of supplying power to the fusion splicer :
(a) internal battery
；
(b) AC-DC power supply. Please turn off fusion
splicer before operation.
1-1
、
Insert battery: Insert the battery into the battery groove.
Make sure it is properly fixed.
1.2
、
Remove battery: Push the battery out
1-3
、
Using AC-DC Adaptor : Put the plug into socket as matching
the anchor point.
2.
Turn on Splicer Power
Press power button
to switch ON/OFF device.
3.
Setting Fiber in Splicer
3.1.Open the windproof cover ;
3.2.Open the left and right sheath
clamps;
3.3.Put the stripped fiber on the
V-groove, and make sure the fiber
end between groove edge and
electrode (as pic).
3.4.Holding the fiber and close the
sheath clamps carefully. If the fiber
is not properly set, please adjust it;
3.5.Repeat the steps 3.3 and 3.4 for second fiber;
3.6.Close the windproof cover.
4.
Splicing Operation
4.1.Mode: Manual /Auto / Full-auto
You can choose the operation model in operation menu.
Manual: Fusion splicing operate step by step controlled by the
operator via the keypad.
Auto: Press the
button, it will automatically core to core
alignment and fusion splicing.
Full-auto: Automatically operation after closed the windproof cover
4.2.Fiber type: SM/MM/NZDS/ED
5.
Pause function :
5.1.Turn on the pause function: under Auto and Full-auto mode,
after core to core aligning the fiber, splicing machine will stop,
then press
button, the splicer began to fuse.
Turn off: No effect any splicing mode operation.
6. Take out the fiber and heat the fiber
1
）
Open the heater cover;
2
）
Open the windproof cover ;
3
）
Open the right and left sheath clamps;
4
）
Take out the fiber and move the fiber protection sleeve to the
splice point. Make sure the splice point in the center of the
fiber protection sleeve tube
5
）
Put the fiber protection sleeve on the heater, close the heater
cover;
6
）
Press
button, and red indicator light will light up;
7
）
When the indicator light off , it means that the heating is
finished;
8
）
Open the heater cover, check if there are air bubbles in
protection sleeve;
9
）
Put the fiber on the cooling tray, until it cooling down
Please scan QR code or visit https://www.prokits.com.tw for
detail manual
TE-6201A-W TE-6201F-W
