background image

Updating MD30 software

The MD30 software update overwrites the previous MD30 firmware version with a new version.

Software update package

The most recent software update package is available as a ZIP file at

https://www.vaisala.com/en/support/md30

.

The ZIP file contains:

MD30 firmware

Release notes document

Update tool

Updating MD30 Software Quick Guide

 (this document)

OSS licenses document for MD30 firmware

Update options

The following update options are available:

MD30 and Vaisala RoadAI system: use a Bluetooth connection to update the MD30 software.

MD30 and other data collection system: use a Bluetooth connection or a cable connection to
update the MD30 software.

Software update over Bluetooth requires a Bluetooth module.

USB

Updating over cable connection

Updating over Bluetooth connection

Figure 1 MD30 firmware update options

More information

Updating MD30 software over Bluetooth connection (page 2)

Updating MD30 software over cable connection (page 6)

M212537EN-A

Quick Guide

Updating MD30 Software

Vaisala Mobile Detector MD30

PUBLISHED BY
Vaisala Oyj
Vanha Nurmijärventie 21
FI-01670 Vantaa, Finland
© Vaisala 2020

All rights reserved. Any logos and/or product names are trademarks of Vaisala or its individual partners.
Any reproduction, transfer, distribution or storage of information contained in this document is strictly
prohibited. All specifications — technical included — are subject to change without notice.

Summary of Contents for MD30








Reviews: