Fagor 8055i FL EN, Руководство по эксплуатации

Страница: 99 / 160

Operating manual
CNC 8055
CNC 8055i
WORKING
WITH OPERATIONS OR
CYCLES
3.
·MC· O
PTION
S
OFT
: V02.2
X
·99·
Rectang
ular and
ci
rcu
lar pocket cycl
es
3.7 Rectangular and circular pocket cycles
Rectangular pocket cycle (level 1).
The following data must be defined:
• The starting point (X, Y), the pocket dimensions (L, H) and the machining conditions in Z (Zs,
Z, P, I, Fz).
Rectangular pocket cycle (level 2).
The following data must be defined:
• The starting point (X, Y), the pocket dimensions (L, H), the inclination angle (

), the type of corner
and the machining conditions in Z (Zs, Z, P, I, Fz).
This key accesses the circular pocket and rectangular pocket operations.
• Also, one must define the milling pass (

, the finishing stock (

) and the machining
direction.
• In the roughing area, one must define the sideways penetration angle (

), the milling
pass (

) and the machining direction.
• In the finishing area, one must define the sideways penetration angle (

), the finishing
stocks (

and

z), the number of finishing passes (N) and the machining direction.