Fagor 8055i FL EN, Руководство по эксплуатации

Страница: 32 / 160

·32·
Operating manual
CNC 8055
CNC 8055i
2.
O
PERATING
IN JO
G MODE
·MC· O
PTION
S
OFT
: V02.2
X
Introductio
n
2.1 Introduction
2.1.1 Standard screen of the MC mode
The standard screen of the MC mode offers the following data:
1. Clock.
2. This window may show the following data:
SBK when "single block" execution mode is selected.
DNC when the DNC mode is active.
P..... Number of the program currently selected.
Message "In position" - "Execution" - "Interrupted" - "RESET".
PLC messages.
3. This window shows the CNC messages.
4. This window may show the following data:
X, Y, Z coordinates of the axes.
In small characters, the axis coordinates referred to machine reference zero. These values are
useful when letting the user define a tool change point (see zone 6) The CNC shows this data
when text 33 of program 999997 has not been defined.
The coordinates of the auxiliary axes that are defined.
The real spindle rpm.
5. The information shown in this window depends on the position of the left switch.
In all cases, it shows the axis feedrate "F" currently selected and the % of F being applied.
When feed-hold is active, the color of the feedrate value changes.