Fagor 8055i FL EN, Руководство по эксплуатации

Страница: 52 / 160

·52·
Operating manual
CNC 8055
CNC 8055i
2.
O
PERATING
IN JO
G MODE
·MC· O
PTION
S
OFT
: V02.2
X
Tool
con
tro
l
Managing a machining center.
When having a machining center, general machine parameter "TOFFM06 (P28) = Yes", the CNC
acts as follows:
If the execution of an operation or cycle involves a tool change, the CNC:
• Selects the desired tool in the magazine.
• Executes the subroutine associated with the tool (general machine parameter "TOOLSUB
(P60)".
• Executes function M06 to make the tool change.
When selecting a new tool in jog mode or working in M mode, the CNC only selects the tool in the
magazine and executes the associated subroutine. The user must execute function M06, either by
programming a block in ISO mode or setting the PLC so the M06 is executed when pressing a
particular key.
The next example uses the [O4] key: DFU B2 R562 = CNCEX1 (M06, M1)
.
In machining centers, the subroutine associated with the tool must not have the M06 function.
i