Fagor 8055i FL EN, Руководство по эксплуатации

Страница: 108 / 160

·108·
Operating manual
CNC 8055
CNC 8055i
3.
WORKING
WITH OPERATIONS OR
CYCLES
·MC· O
PTION
S
OFT
: V02.2
X
Re
aming
o
peratio
n
3.10.1 Definition of data
Coordinates of the machining point.
The coordinates are defined one by one. After placing the cursor on the coordinates of the axes to
be defined, the value is entered in one of the following ways.
• Entering the value manually. Key in the desired value and press [ENTER].
• Assign the current machine position.
Jog the axis with the handwheel or the JOG keys up to the desired point. Press [RECALL] so
the selected data assumes the value shown in the top right window and press [ENTER].
The top right window shows the tool position at all times.
Machining conditions in Z (Zs, Z, P, I, t).
The machining conditions are defined one by one.
• The Zs and Z values are defined as the coordinates of the machining point.
• To define the rest of the values (P, t), go to the corresponding window, key in the desired value
and press [ENTER].