Fagor 8055i FL EN, Руководство по эксплуатации

Страница: 71 / 160

CNC 8055
CNC 8055i
·MC· O
PTION
S
OFT
: V02.2
X
3
·71·
WORKING WITH OPERATIONS OR
CYCLES
Use the following CNC keys to select the different machining operations or cycles.
User cycles
The user cycle is edited like any other standard cycle of the MC mode. Once all the required data
has been defined, the user can simulate or execute the cycle like any other standard cycle of the
MC mode.
Cycles or operations of the CNC
When pressing any other key, the CNC selects the corresponding standard machining cycle,
changes the display and turns on the lamp of the key that has been pressed (indicating the selected
type.
Standard machining operations or cycles may be selected with each one of the following keys:
When pressing [PCALL], the CNC shows all the user cycles defined by the machine
manufacturer with the WGDRAW application.
Boring. Surface milling and slot milling.
Reaming. Pocket with profile (2D and 3D).
Tapping. Rectangular and circular boss.
Drilling and center punching. Rectangular and circular pocket.
Profile milling. Positioning.
When the machining operation or cycle has several levels, [LEVEL CYCLE] must be
pressed to select the desired cycle level.