Fagor 8055i FL EN, Руководство по эксплуатации

Страница: 34 / 160

·34·
Operating manual
CNC 8055
CNC 8055i
2.
O
PERATING
IN JO
G MODE
·MC· O
PTION
S
OFT
: V02.2
X
Introductio
n
2.1.2 Special screen of the MC mode
The special screen of the MC mode offers the following data:
1. Clock.
2. This window may show the following data:
SBK when "single block" execution mode is selected.
DNC when the DNC mode is active.
P..... Number of the program currently selected.
Message "In position" - "Execution" - "Interrupted" - "RESET".
PLC messages.
3. This window shows the CNC messages.
4. This window shows the lines of the program currently selected.
5. The X, Y, Z axes have the following fields:
The spindle (S) has the following fields:
The auxiliary axes only show the real current position of the axis.
COMMAD It indicates the programmed coordinate or position that the axis
must reach.
ACTUAL It indicates the actual (current) position of the axis.
TO GO It indicates the distance which is left to run to the programmed
coordinate.
FOLLOWING ERROR Difference between the theoretical value and the real value of
the position.
THEORETICAL Programmed theoretical S speed.
RPM Speed in rpm.
M/MIN Speed in meters per minute.
FOLLOWING ERROR When working with spindle orientation (M19), it indicates the
difference between the theoretical and the real speeds.