Fagor 8055i FL EN, Руководство по эксплуатации

Страница: 100 / 160

·100·
Operating manual
CNC 8055
CNC 8055i
3.
WORKING
WITH OPERATIONS OR
CYCLES
·MC· O
PTION
S
OFT
: V02.2
X
Rectang
ular and
ci
rcu
lar pocket cycl
es
Circular pocket cycle (level 1).
The following data must be defined:
• The center coordinates (Xc, Yc), the pocket radius (R) and the machining conditions in Z (Zs,
Z, P, I, Fz).
Circular pocket cycle (level 2).
This level is the right one to machine pre-emptied pockets or crowns.
The following data must be defined:
• The center coordinates (Xc, Yc), the inside radius (Ri) and the outside radius (Re) of the pocket
and the machining conditions in Z (Zs, Z, P, I, Fz).
• In the roughing area, one must define the sideways penetration angle (

), the milling
pass (

) and the machining direction.
• In the finishing area, one must define the sideways penetration angle (

), the finishing
stocks (

and

z), the number of finishing passes (N) and the machining direction.
• In the roughing area, one must define the sideways penetration angle (

), the milling
pass (

) and the machining direction.
• In the finishing area, one must define the sideways penetration angle (

), the finishing
stocks (

and

z), the number of finishing passes (N) and the machining direction.