Fagor 8055i FL EN, Руководство по эксплуатации

Страница: 104 / 160

·104·
Operating manual
CNC 8055
CNC 8055i
3.
WORKING
WITH OPERATIONS OR
CYCLES
·MC· O
PTION
S
OFT
: V02.2
X
Position
ing
(2
le
ve
ls)
3.8.1 Definition of data
Coordinates of the starting point.
The coordinates are defined one by one. After placing the cursor on the coordinates of the axes to
be defined, the value is entered in one of the following ways.
• Entering the value manually. Key in the desired value and press [ENTER].
• Assign the current machine position.
Jog the axis with the handwheel or the JOG keys up to the desired point. Press [RECALL] so
the selected data assumes the value shown in the top right window and press [ENTER].
The top right window shows the tool position at all times.
Order in which the axes move.
Type of feedrate.
Auxiliary "M" functions.
The functions will be executed in the same order as these are arranged on the list.
Select the corresponding window with the [

][

] keys Use the [

][

] keys to move around the
window.
To delete a function, select it and press [CLEAR]
To select the moving order, place the cursor over this icon and press the two-color key.
All three axes at the same time.
First the Z axis and then the plane (X and Y axes at the same time).
First the plane (X and Y axes at the same time) and then the Z axis.
To select the type of feedrate, place the cursor over this icon and press the two-color key.
Programmed feedrate.
Rapid feed.