Fagor 8055i FL EN, Руководство по эксплуатации

Страница: 30 / 160

·30·
Operating manual
CNC 8055
CNC 8055i
1.
GENERAL CONC
EPTS
·MC· O
PTION
S
OFT
: V02.2
X
W
o
rking
i
n
M mode
wi
th
the MC keyboa
rd
1.4 Working in M mode with the MC keyboard
The MC keyboard is designed to also be able to work in M mode. In M mode, use the alphanumeric
keyboard and the keys that replace the softkeys F1 through F7.
1.5 Video off
Also, any message (PLC, program, etc.) restores the CNC image.
1.6 Managing the CYCLE START key
In order to avoid undesired executions when pressing key sequences that are not supported in MC
mode, the CNC changes the "Start" icon at the top of the window from green to gray and shows a
message indicating that it is an invalid action.
For example, if "M3 Start" is pressed (sequence not supported in MC mode) while a part-program
is selected, the CNC issues a warning and prevents the selected part-program from running when
detecting the "Start" key.
There are 2 work modes: MC work mode and M work mode. Press the key
sequence [SHIFT] [ESC] to go from one work mode to the other.
Alphanumeric keyboard:
The keys that replace the softkeys F1 through F7
are:
The keystroke sequence [SHIFT] [CLEAR] clears the CRT screen (it goes blank).
Press any key to restore the image.