Fagor 8055i FL EN, Руководство по эксплуатации

Страница: 120 / 160

·120·
Operating manual
CNC 8055
CNC 8055i
3.
WORKING
WITH OPERATIONS OR
CYCLES
·MC· O
PTION
S
OFT
: V02.2
X
Multip
le positio
nin
g
3.13.1 Multiple positioning in several locations
Up to 12 points (X1, Y1) ··· (X12, Y12) may be defined. When not using the 12 definition points, the
first unused point must be defined with the same coordinates as the last point.
Data definition.
The coordinates are defined one by one. After placing the cursor on the coordinates of the axes to
be defined, the value is entered in one of the following ways.
• Entering the value manually. Key in the desired value and press [ENTER].
• Assign the current machine position.
Jog the axis with the handwheel or the JOG keys up to the desired point. Press [RECALL] so
the selected data assumes the value shown in the top right window and press [ENTER].
The top right window shows the tool position at all times.
If a coordinate is left blank, the cycle will assume that it is the same as that of the previous one.
The coordinates of each point may also be defined incrementally. To do that, select the desired
coordinate with the cursor and press the two-color key. Both coordinates of the selected point will
be shown preceded by the "

" icon that indicates the incremental value with respect to the previous
point.
This key associates this positioning with the active operation.
If defined... The CNC assumes...
X1 25.323 Y1 26.557 Point: X1 25.323 Y1 26.557
X2 Y2 78.998 Point: X2 25.323 Y2 78.998
X3 67.441 Y3 83.231 Point: X3 67.441 Y3 83.231
X4 Y4 Point: X4 67.441 Y4 83.231
X5 Y5 There are no more points, it is a repetition of the previous point.