Fagor 8055i FL EN, Руководство по эксплуатации

Страница: 50 / 160

·50·
Operating manual
CNC 8055
CNC 8055i
2.
O
PERATING
IN JO
G MODE
·MC· O
PTION
S
OFT
: V02.2
X
Tool
con
tro
l
Tool information in machining centers.
This position does not exist on machining centers with tool changer arm; therefore, it will display
the value of the variable: NXTOOL.
The NXTOOL variable sets the number of the next tool. This tool is the one that is selected but waiting
to be activated by the execution of M06.
General machine parameter TOFFM06 (P28) indicates whether the machine is a machining center
or not. If g.m.p. If TOFFM06 (P28) = YES, instead of displaying the tool change point, the CNC will
display the value of the NXTOOL variable.
If the tool number and its associated offset are different, the CNC will also show the number of the
associated tool offset.
NXTOOL variable
Number of the active tool
(T1).
Number of next tool (T2).
N u m b e r o f t h e o f f s e t
associated with the next
tool (D3).
Number of the active tool
(T2).
Offset number of the active
tool (D3).
Number of the next tool
(T3).